Journals

2-381. H. Bikas, D. Manitaras, T. Souflas, P. Stavropoulos, “Process-Driven Layout Optimization of a Portable Hybrid Manufacturing Robotic Cell Structure”, Eng, Volume 18, Issue 8, pg. 918-931, (2024)
2-380. T. Souflas, C. Gerontas, H. Bikas, P. Stavropoulos, “On the Optimization of Robot Machining: A Simulation-Based Process Planning Approach”, Machines, Volume 18, Issue 8, pg. 521, (2024)
2-379. G.Kokotinis, G. Michalos, Z. Arkouli, S. Makris, “Α Behavior Trees-based architecture towards operation planning in hybrid manufacturing”, International Journal of Computer Integrated Manufacturing, Volume 37, Issue 3, pg. 324–349, (2023)
2-378. G. Kokotinis, G. Michalos, Z. Arkouli, S. Makris, “On the quantification of human-robot collaboration quality”, International Journal of Computer Integrated Manufacturing, Volume 36, Issue 10, pg. 1431–1448, (2023)
2-377. P. Aivaliotis, Z. Arkouli, K. Georgoulias, S. Makris, “Methodology for enabling dynamic digital twins and virtual model evolution inindustrial robotics – a predictive maintenance application”, International Journal of Computer Integrated Manufacturing, Volume 36, Issue 7, pg. 947-965, (2023)
2-376. L. Prezas, Z. Arkouli, G. Michalos, P. Angelakis, C. Gkournelos, S. Makris, “A multi-purpose robot perception system enabling closed-loop control for zero defect manufacturing in gluing processes of large parts”, Robotics and Autonomous Systems, Volume 181, (2024)
2-375.A. Papacharalampopoulos, K. Alexopoulos, P. Catti, P. Stavropoulos, G. Chryssolouris, “Learning More with Less Data in Manufacturing: The Case of Turning Tool Wear Assessment through Active and Transfer Learning”, Processes, Volume 12, pg. 1262, (2024)
2-374. A. Papavasileiou, S. Nikoladakis, F. P. Basamakis, S. Aivaliotis, G. Michalos, S. Makris, “A Voice-Enabled ROS2 Framework for Human–Robot Collaborative Inspection”, Applied Sciences, Volume 14, Issue 10, pg .4138, (2024)
2-373. A. Papavasileiou,G. Michalos, S. Makris, “Quality control in manufacturing – review and challenges on robotic applications”, International Journal of Computer Integrated Manufacturing, Available Online, (2024)
2-372. K. Kavvathas, E. Kampourakis, D. Andronas, N. Fousekis, S. Makris, “A service-oriented orchestration and planning tool for plug and produce manufacturing: a deformable object handling supervision paradigm”, International Journal of Computer Integrated Manufacturing, pg. 1-24, (2024)
2-371. D. Andronas, E. Kampourakis, G. Papadopoulos, K. Bakopoulou, P. S. Kotsaris, G. Michalos, S. Makris, “Towards seamless collaboration of humans and high-payload robots: An automotive case study”, Robotics and Computer-Integrated Manufacturing, Volume 83, pg. 102544, (2023)
2-370. G. Papadopoulos, D. Andronas, E. Kampourakis, N. Theodoropoulos, P. S. Kotsaris, S. Makris, “On deformable object handling: multi-tool end-efector for robotized manipulation and layup of fabrics and composites”, The International Journal of Advanced Manufacturing Technology, Volume 128, pg. 1675–1687, (2023)
2-369. N. Theodoropoulos, E. Kampourakis, D. Andronas, S. Makris, “Cyber-physical systems in non-rigid assemblies: A methodology for the calibration of deformable object reconstruction models”, Journal of Manufacturing Systems, Volume 70, pg. 525-537, (2023)
2-368. K. Katsampiris-Salgado, K. Haninger, C. Gkrizis, N. Dimitropoulos, J. Krüger, G. Michalos, S. Makris, “Collision detection for collaborative assembly operations on high-payload robots”, Robotics and Computer-Integrated Manufacturing, Volume 87, (2023)
2-367. P. Stavropoulos, H. Bikas, T. Bekiaris, “A powder delivery system for large-scale DED machines”, 32nd CIRP Design Conference, Volume 109, pg. 617-622, (2023)
2-366. P. Stavropoulos, H. Bikas, K. Sabatakakis, C. Theoharatos, S. Grossi, “Quality assurance of battery laser welding: A data-driven approach”, 12th CIRP Conference on Photonic Technologies [LANE 2022], Volume 111, pg. 784-789, (2023)
2-365. H. Bikas, S. Koutsoukos, P. Stavropoulos, “A decision support method for evaluation and process selection of Additive Manufacturing”, Procedia CIRP, Volume 81, pg. 1107–1112, (2023)
2-364. H. Bikas, M. A. Terzakis, P. Stavropoulos, “Manufacturability-Based Design Optimization for Directed Energy Deposition Processes”, Machines, Volume 11, Issue 9, (2023)
2-363. P. Stavropoulos, T. Souflas, C. Papaioannou, H. Bikas, D. Mourtzis, “An adaptive, Artificial Intelligence-based chatter detection method for milling operations”, The International Journal of Advanced Manufacturing Technology, Volume 124, pg. 2037-2058, (2023)
2-362. P. Stavropoulos, A. Papacharalampopoulos, K. Sabatakakis, “Data Attributes in Quality Monitoring of Manufacturing Processes: The Welding Case”, Applied Sciences, Volume 13, Issue 19, pg. 10580, (2023)
2-361. F. M-Oliveira, A.D. Rocha, D. Alemão, N. Freitas, R. Toshev, J. Södergård, N. Tsoniotis, C. Argyriou, A. Papacharalampopoulos, P. Stavropoulos, P. Perlo, J. Barata, “Cloud-Based Architecture for Production Information Exchange in European Micro-Factory Context”, Applied Sciences, Volume 13, Issue 18, pg. 10223, (2023)
2-360. V.C. Panagiotopoulou, A. Paraskevopoulou, P. Stavropoulos, “A Modelling-Based Framework for Carbon Emissions Calculation in Additive Manufacturing: A Stereolithography Case Study”, Processes, Volume 11, Issue 9, pg. 2574, (2023)
2-359. D. Kames, A. Mamasioulas, S. Sebastian, G. Chryssolouris, “Hardware start-ups and manufacturing innovation”, Production & Manufacturing Research, Volume 11, Issue 1, (2023)
2-358. P. Stavropoulos, K. Tzimanis, T. Souflas, H. Bikas, “Knowledge-based manufacturability assessment for optimization of additive manufacturing processes based on automated feature recognition from CAD models”, The International Journal of Advanced Manufacturing Technology, Volume 122, Issue 2,pg. 993–1007, (2022)
2-357. P. Stavropoulos, P. Foteinopoulos, J. Stavridis, H. Bikas, “Increasing the industrial uptake of additive manufacturing processes: A training framework”, Advances in Industrial and Manufacturing Engineering, Volume 6, (2023)
2-356. P. Stavropoulos, A. Papacharalampopoulos, K. Sabatakakis, D. Mourtzis, “Metamodelling of Manufacturing Processes and Automation Workflows towards Designing and Operating Digital Twins”, Applied Sciences, Volume 13, Issue 3, (2023)	pdf
2-355.P. Stavropoulos, A. Papacharalampopoulos, K. Sabatakakis, “Robust and Secure Quality Monitoring for Welding through Platform-as-a-Service: A Resistance and Submerged Arc Welding Study”, Machines, Volume 11, Issue 298, (2023)	pdf
2-354. P. Stavropoulos, T. Souflas, D. Manitaras, C. Papaioannou, H. Bikas, “Optimization of Milling Processes: Chatter Detection via a Sensor-Integrated Vice”, Machines, Volume 11, Issue 1, (2023)	pdf
2-353. P. Stavropoulos, G. Pastras, T. Souflas, K. Tzimanis, H. Bikas, “A Computationally Efficient Multi-Scale Thermal Modelling Approach for PBF-LB/M Based on the Enthalpy Method”, Metals, Volume 12, Issue 11, (2022)	pdf
2-352. P. Stavropoulos, V.C. Panagiotopoulou, “Carbon Footprint of Manufacturing Processes: Conventional vs. Non-Conventional”, Processes, Volume 10, Issue 9, (2022)	pdf
2-351. G. Apostolopoulos, D. Andronas, N. Fourtakas, S. Makris, “Operator training framework for hybrid environments: An Augmented Reality module using machine learning object recognition”, Procedia CIRP, Volume 106, pg. 102-107, (2022)	pdf
2-350. S. Makris, E. Kampourakis, D. Andronas, “On deformable object handling: Model-based motion planning for human-robot co-manipulation”, CIRP Annals, Volume 71, Issue 1, pg. 29-32, (2022)	pdf
2-349. D. Andronas, Z. Arkouli, N. Zacharaki, G. Michalos, A. Sardelis, G. Papanikolopoulos, S. Makris, “On the perception and handling of deformable objects – A robotic cell for white goods industry”, Robotics and Computer-Integrated Manufacturing, Volume 77, (2022)	pdf
2-348. S. Aivaliotis, K. Lotsaris, C. Gkournelos, N. Fourtakas, S. Koukas, N. Kousi, S. Makris, “An augmented reality software suite enabling seamless human robot interaction”, International Journal of Computer Integrated Manufacturing, Available Online, (2022)	pdf
2-347. P. Stavropoulos, A. Papacharalampopoulos, “Designing a digital twin for micromanufacturing processes”, Advances in Mechanical Engineering, Available Online, (2022)	pdf
2-346. L. Athanasopoulou, H. Bikas, A. Papacharalampopoulos, P. Stavropoulos, G. Chryssolouris, “An industry 4.0 approach to electric vehicles”, International Journal of Computer Integrated Manufacturing, Available Online, (2022)	pdf
2-345. P. Stavropoulos, V.C. Panagiotopoulou, “Developing a Framework for Using Molecular Dynamics in Additive Manufacturing Process Modelling”, MDPI Modelling, Volume 3, Issue 1, pg. 189-200, (2022)	pdf
2-344. P. Stavropoulos, V.C. Panagiotopoulou, A.Papacharalampopoulos, P. Aivaliotis, D. Georgopoulos, K. Smyrniotakis, “A Framework for CO2 Emission Reduction in Manufacturing Industries: A Steel Industry Case”, MDPI Designs, Volume 6, Issue 2, pg 22, (2022)	pdf
2-343. T. Souflas, H. Bikas, M. Ghassempouri, A. Salmi, E. Atzeni, A. Saboori, I. Brugnetti, A. Valente, F. Mazzucato, P. Stavropoulos, “A comparative study of dry and cryogenic milling for Directed Energy Deposited IN718 components: effect on process and part quality”, The International Journal of Advanced Manufacturing Technology, Volume 119, pg.745-758, (2022)	pdf
2-342. D. Mourtzis, J. Angelopoulos, N. Panopoulos, “Closed-Loop Robotic Arm Manipulation Based on Mixed Reality”, Applied Sciences, Volume 12, Issue 6, pg. 2972, (2022)	pdf
2-341. P. Stavropoulos, K. Sabatakakis, A. Papacharalampopoulos, D. Mourtzis, “Infrared (IR) quality assessment of robotized resistance spot welding based on machine learning”, IJAMT, Volume 119, pg. 1785–1806, (2022)	pdf
2-340. D. Mourtzis, J. Angelopoulos, N. Panopoulos, “Operator 5.0: a survey on enabling technologies and a framework for digital manufacturing based on extended reality”, Journal of Machine Engineering, Volume 22, Issue 1, pg. 43-69, (2022)	pdf
2-339. K. Alexopoulos, I. Anagiannis, N. Nikolakis, G. Chryssolouris, “A quantitative approach to resilience in manufacturing systems”,Journal of production research, Available Online, (2022)	pdf
2-338. D. Andronas, Z. Arkouli, N.Zacharaki, G.Michalos, A.Sardelis, G.Papanikolopoulos, S.Makris, “On the perception and handling of deformable objects – A robotic cell for white goods industry”, Robotics and Computer-Integrated Manufacturing, Volume 77, Issue 102358, (2022)	pdf
2-337. P. Stavropoulos, A. Papacharalampopoulos, K. Tzimanis, D. Petrides, G. Chryssolouris, “On the Relationship between Circular and Innovation Approach to Economy”, Sustainability, Volume 13, Issue 21, pg. 1-17, (2021)	pdf
2-336. P. Stavropoulos, P. Foteinopoulos, A. Papapacharalampopoulos, “On the Impact of Additive Manufacturing Processes Complexity on Modelling”, Applied Sciences, Volume 11, Issue 16, pg. 7743, (2021)	pdf
2-335. A. Papavasileiou, P. Aivaliotis, S. Aivaliotis, S. Makris, “An optical system for identifying and classifying defects of metal parts”, International Journal of Computer Integrated Manufacturing, Volume 35, Issue 3, pg. 326-340 (2021)	pdf
2-334. V. C. Panagiotopoulou, P. Stavropoulos, G. Chryssolouris, “A critical review on the environmental impact of manufacturing: a holistic perspective”, International Journal of Advanced Manufacturing Technology, Volume 118, pg. 603-625, (2021)	pdf
2-333. N. Dimitropoulos, T. Togias, N. Zacharaki, G. Michalos, S. Makris, “Seamless Human–Robot Collaborative Assembly Using Artificial Intelligence and Wearable Devices”, Appl. Sci., 2021, 11(12), 5699, (2021)	pdf
2-332. P. Stavropoulos, A. Papacharalampopoulos, C. K. Michail, & G. Chryssolouris, “Robust Additive Manufacturing Performance through a Control Oriented Digital Twin”, Metals, Volume 11, Issue 5, 708, (2021)	pdf
2-331. I. Munoz, J. Alonso-Madrid, M. Menendez-Muniz, M. Uhart, J. Canou, C. Martin, M. Fabritius, L. Calvo, L. Poudelet, R. Cardona, H. Lombois-Burger, N. Vlasopoulos, C. Bouyssou, J. Dirrenberger, A. Papacharalampopoulos, P. Stavropoulos, “Life cycle assessment of integrated additive-subtractive concrete 3D printing”, The International Journal of Advanced Manufacturing Technology, Volume 112, pg. 2149-2159, (2021)	pdf
2-330. A.C Bavelos, N. Kousi, C. Gkournelos, K. Lotsaris, S. Aivaliotis, G. Michalos, S. Makris, “Enabling Flexibility in Manufacturing by Integrating Shopfloor and Process Perception for Mobile Robot Workers”, Applied Sciences, Volume 11, Issue 9, 3985, (2021)	pdf
2-329. N. Kousi, C. Gkournelos, S. Aivaliotis, K. Lotsaris, A.C Bavelos, P. Baris, G. Michalos, S. Makris, “Digital Twin for Designing and Reconfiguring Human–Robot Collaborative Assembly Lines”, Applied Sciences, Volume 11, Issue 10, 4620, (2021)	pdf
2-328. P. Aivaliotis, Z. Arkouli, K. Georgoulias, S.Makris, “Degradation curves integration in physics-based models: Towards the predictive maintenance of industrial robots”, Robotics and Computer-Integrated Manufacturing, Volume 71, 102177, (2021)	pdf
2-327. D. Mourtzis, J. Angelopoulos, N. Panopoulos, “Smart Manufacturing and Tactile Internet Based on 5G in Industry 4.0: Challenges, Applications and New Trends”, Electronics, Volume 10, Issue 24, pg. 3175, (2021)	pdf
2-326. D. Mourtzis, “Towards the 5th industrial revolution: a literature review and a framework for process optimization based on big data analytics and semantics”, Journal of Machine Engineering, Volume 21, pg. 5-39, (2021)	pdf
2-325. D. Mourtzis, J. Angelopoulos, N. Panopoulos, “Robust Engineering for the Design of Resilient Manufacturing Systems”, Applied Sciences, Volume 11, Issue 7, pg. 3067, (2021)	pdf
2-324. D. Mourtzis, J. Angelopoulos, V. Zogopoulos, “Integrated and adaptive AR maintenance and shop-floor rescheduling”, Computers in Industry, Volume 125, pg. 103383, (2021)	pdf
2-323. P. Stavropoulos, H. Bikas, O. Avram, A. Valente, G. Chryssolouris, “Hybrid subtractive–additive manufacturing processes for high value-added metal components”, The International Journal of Advanced Manufacturing Technology, Volume 111, Issue 3, pg. 645-655, (2020)	pdf
2-322. D. Mourtzis, N. Boli, E. Xanthakis, K. Alexopoulos, “Energy trade market effect on production scheduling: an Industrial Product-Service System (IPSS) approach”, International Journal of Computer Integrated Manufacturing, pg. 76-94, (2020)	pdf
2-321. Dimitris Mourtzis, John Angelopoulos, “An intelligent framework for modelling and simulation of artificial neural networks (ANNs) based on augmented reality”, The International Journal of Advanced Manufacturing Technology, Volume 111,pg. 1603-1616, (2020)	pdf
2-320. N. Milas, D. Mourtzis, P. Giotakos, E. Tatakis, “Two-Layer Genetic Algorithm for the Charge Scheduling of Electric Vehicles”, IEEE XPLORE, pg. 1-10, (2020)	pdf
2-319. F. Belkadi, N. Boli, L. Usatorre, E. Maleki, K. Alexopoulos, A. Bernard, D. Mourtzis, “A knowledge-based collaborative platform for PSS design and production”, CIRP Journal of Manufacturing Science and Technology, Volume 29, Issue B, pg. 220-231, (2020)	pdf
2-318. D. Mourtzis, E. Zervas, N. Boli, P. Pittaro, “A cloud-based resource planning tool for the production and installation of industrial product service systems (IPSS)”, The International Journal of Advanced Manufacturing Technology, Volume 106, pg. 4945-4963, (2020)	pdf
2-317. N. Milas, D. Mourtzis, E. Tatakis, “A Decision-Making Framework for the Smart Charging of Electric Vehicles Considering the Priorities of the Driver”, ENERGIES, Volume 13. Issue 22, pg. 6120, (2020)	pdf
2-316. D. Mourtzis, J. Angelopoulos, N. Panopoulos, “Intelligent Predictive Maintenance and Remote Monitoring Framework for Industrial Equipment Based on Mixed Reality”, Frontiers in Mechanical Engineering, Volume 10, pg. 99, (2020)	pdf
2-315. N. Papakostas, C. Constantinescu, D. Mourtzis, “Novel Industry 4.0 Technologies and Applications”, Applied Sciences, Volume 10, Issue 18, pg. 6498, (2020)	pdf
2-314. D. Mourtzis, V. Siatras, J. Angelopoulos, “Real-Time Remote Maintenance Support Based on Augmented Reality (AR)”, Applied Sciences, Volume 10, Issue 5, 1855, (2020)	pdf
2-313. P. Stavropoulos, A. Papacharalampopoulos, L. Athanasopoulou, “A molecular dynamics based digital twin for ultrafast laser material removal processes”, The International Journal of Advanced Manufacturing Technology, Volume 108, pg. 413-426, (2020)	pdf
2-312. K. Alexopoulos, N. Nikolakis, G. Chryssolouris, “Digital twin-driven supervised machine learning for the development of artificial intelligence applications in manufacturing”, International Journal of Computer Integrated Manufacturing, Volume 33, Issue 5, pg. 429-439, (2020)	pdf
2-311. S. Panicucci, N. Nikolakis, T. Cerquitelli, F. Ventura, S. Proto, E. Macii, S. Makris, D. Bowden, P. Becker, N. O’Mahony, L. Morabito, C. Napione, A. Marguglio, G. Coppo, S. Andolina, “A Cloud-to-Edge Approach to Support Predictive Analytics in Robotics Industry”, Electronics, Volume 9, Issue 3, pg. 492-513, (2020)	pdf
2-310. I. Anagiannis, N. Nikolakis, K. Alexopoulos, “Energy-Based Prognosis of the Remaining Useful Lifeof the Coating Segments in Hot Rolling Mill”, Applied Sciences, Volume 10, Issue 19, 6827, (2020)	pdf
2-309. A.K. Lianos, H. Bikas, P. Stavropoulos, “A Shape Optimization Method for Part Design Derived from the Buildability Restrictions of the Directed Energy Deposition Additive Manufacturing Process”, Designs, Volume 4, Issue 3, (2020)	pdf
2-308. A.K. Lianos, S. Koutsoukos, H. Bikas, P. Stavropoulos, “Manufacturability Assessment and Design for AM”, Procedia CIRP, Volume 91, pg. 290-294, (2020)	pdf
2-307. P. Stavropoulos, A.K. Lianos, H. Bikas, D. Mourtzis, “Skills Requirements for the 4th Industrial Revolution The Additive Manufacturing Case”, 7th International Conference of Materials and Manufacturing Engineering (ICMMEN 2020), MATEC Web Conf. Volume 318, (2020)	pdf
2-306. P. Foteinopoulos, V. Esnault, G. Komineas, A. Papacharalampopoulos, P. Stavropoulos, “Cement-based additive manufacturing: experimental investigation of process quality”, The International Journal of Advanced Manufacturing Technology, Volume 106, pg. 4815-4826, (2020)	pdf
2-305. A. Papacharalampopoulos, C. Giannoulis, P. Stavropoulos, D. Mourtzis, “A Digital Twin for Automated Root-Cause Search of Production Alarms Based on KPIs Aggregated from IoT.”, Novel Industry 4.0 Technologies and Applications, Appl. Sci. 2020, Volume 10, Issue 7, 2377, (2020)	pdf
2-304. P. Stavropoulos, A. Papacharalampopoulos, T. Souflas, “Indirect online tool wear monitoring and model-based identification of process-related signal”, Advances in Mechanical Engineering, Volume 12, Issue 5, (2020)	pdf
2-303. A. Papacharalampopoulos, “Investigating Data-Driven Systems as Digital Twins: Numerical Behavior of Ho–Kalman Method for Order Estimation”, Optimization-Driven Methods for Optimal Operation and Control Strategies, Processes, Volume 8, Issue 4, 431, (2020)	pdf
2-302. P. Foteinopoulos, A. Papacharalampopoulos, K. Angelopoulos, P. Stavropoulos, “Development of a simulation approach for laser powder bed fusion based on scanning strategy selection”, The International Journal of Advanced Manufacturing Technology, Volume 108, pg. 3085–3100, (2020)	pdf
2-301. A. Papacharalampopoulos, K. Tzimanis, K. Sabatakakis, P. Stavropoulos, “Deep Quality Assessment of a Solar Reflector Based on Synthetic Data: Detecting Surficial Defects from Manufacturing and Use Phase”, Sensing Technology and Data Interpretation in Machine Diagnosis and Systems Condition Monitoring, Sensors, Volume 20, Issue 19, 5481, (2020)	pdf
2-300. P. Stavropoulos, A. Papacharalampopoulos, J. Stavridis, K. Sampatakakis, “A three-stage quality diagnosis platform for laser-based manufacturing processes”, The International Journal of Advanced Manufacturing Technology, Volume 110, pg. 2991–3003, (2020)	pdf
2-299. P. Stavropoulos, A. Papacharalampopoulos, K. Tzimanis, A.K. Lianos, “Manufacturing Resilience during the Coronavirus Pandemic: On the investigation of Manufacturing Processes Agility”, European Journal of Social Impact and Circular Economy, pg. 28-57, (2020)	pdf
2-298. H. Bikas, S. Koutsoukos, P. Stavropoulos, “A decision support method for evaluation and process selection of Additive Manufacturing”, Procedia CIRP, Volume 81, pg 1107-1112, (2019)	pdf
2-297. H. Bikas, A.K. Lianos, P. Stavropoulos, “A design framework for additive manufacturing”, International Journal of Advanced Manufacturing Technology, Volume 103, pg. 3769–3783, (2019)	pdf
2-296. N. Nikolakis, R. Senington, K. Sipsas, A. Syberfeldt, S. Makris, “On a containerized approach for the dynamic planning and control of a cyber-physical production system”, Robotics and Computer Integrated Manufacturing, Volume 64, (2020)	pdf
2-295. A. Mamasioulas, D.Mourtzis, G.Chryssolouris, “A manufacturing innovation overview: concepts, models and metrics”, International Journal of Computer Integrated Manufacturing, Available online, (2020)	pdf
2-294. L. Wang, R. Gao, J. Vancza, J. Kruger, X.V. Wang, S. Makris, G. Chryssolouris, “Symbiotic human-robot collaborative assembly”, CIRP Annals, Volume 68, Issue 2, pg. 701-726, (2019)	pdf
2-293. G.Pastras, A. Fysikopoulos, G. Chryssolouris, “A theoretical investigation on the potential energy savings by optimization of the robotic motion profiles”, Robotics and Computer-Integrated Manufacturing, Volume 58, pg. 55-68, (2019)	pdf
2-292. P. Stavropoulos, P. Foteinopoulos, A. Papacharalampopoulos, G. Tsoukantas, “Warping in SLM additive manufacturing processes: estimation through thermo-mechanical analysis”, The International Journal of Advanced Manufacturing Technology, Volume 104, pg. 1571-1580, (2019)	pdf
2-291. P. Aivaliotis, S. Aivaliotis, C. Gkournelos, K. Kokkalis, G. Michalos, S. Makris,”Power and force limiting on industrial robots for human-robot collaboration”, Robotics and Computer-Integrated Manufacturing, Volume 59, pg. 346-360, (2019)	pdf
2-290. S. Papanastasiou, N. Kousi, P. Karagiannis, C. Gkournelos, A. Papavasileiou, K. Dimoulas, K. Baris, S. Koukas, G. Michalos, S. Makris, “Towards seamless human robot collaboration: integrating multimodal interaction”, The International Journal of Advanced Manufacturing Technology, Volume 105, pg. 3881-3897, (2019)	pdf
2-289. P. Aivaliotis, K. Georgoulias, G. Chryssolouris, “The use of Digital Twin for predictive maintenance in manufacturing”, International Journal of Computer Integrated Manufacturing, Volume 32, Issue 11, pg. 1067-1080, (2019)	pdf
2-288. G. Modoni, A. Trombetta, M. Veniero, M. Sacco, D. Mourtzis,”An event-driven integrative framework enabling information notification among manufacturing resources”, International Journal of Computer Integrated Manufacturing, Volume 32, Issue 3, pg. 241-252, (2019)	pdf
2-287. G. Lanza, K. Ferdows, S. Kara, D. Mourtzis, G. Schuh, J. Váncza, L. Wang, H. Wiendahl,”Global Production Networks: Design and Operation”, CIRP Annals-Keynote, Available Online, (2019)	pdf
2-286. D. Mourtzis,”Design of customised products and manufacturing networks: towards frugal innovations”, International Journal of Computer Integrated Manufacturing, Volume 31, Issue 12, pg. 1161-1173, (2019)	pdf
2-285. D. Mourtzis,”Simulation in the design and operation of manufacturing systems: state of the art and new trends”, International Journal of Production Research, Available Online, (2019)	pdf
2-284. D. Mourtzis, V. Zogopoulos, F. Xanthi,”Augmented reality application to support the assembly of highly customized products and to adapt to production re-scheduling”, International Journal of Advanced Manufacturing Technology, pg. 1-12, (2019)	pdf
2-283. D. Mourtzis, V. Zogopoulos, K. Vlachou,”Frugal innovation and its application in manufacturing networks”, Manufacturing Letters, Volumen 20, pg. 27-29, (2019)	pdf
2-282. D. Mourtzis, S. Fotia N. Boli, K. Vlachou,”Modelling and Quantification of Industry 4.0 Manufacturing Complexity based on Information Theory: A Robotics Case study”, International Journal of Production Research, Available Online, (2019)	pdf
2-281. F. Belkadi, E. Vlachou, R. Gupta, V. Zogopoulos, M. Kaya, A. Bernard, D. Mourtzis, S. Natalizio, B. Büyükdığan, I. Bayrak,”Modularity as a support for frugal product and supplier network co-definition under regional market constraints: a mirroring hypothesis application”, International Journal of Production Research, Volume 56, Issue 20, pg. 6575-6590, (2018)	pdf
2-280. G. Pezzotta, C. Sassanelli, F. Pirola, R. Sala, M. Rossi, S. Fotia, A. Koutoupes, S. Terzi, D. Mourtzis,”The Product Service System Lean Design Methodology (PSSLDM): Integrating product and service components along the whole PSS lifecycle”, Journal of Manufacturing Technology Management, Volume 29, Issue 8, pg. 1270-1295, (2018)	pdf
2-279. J. Hochdörffer, J. Buergin, E. Vlachou, V. Zogopoulos, G. Lanza, D. Mourtzis,”Holistic approach for integrating customers in the design, planning, and control of global production networks”, CIRP Journal of Manufacturing Science and Technology, Volume 23, pg. 98-107, (2018)	pdf
2-278. F. Belkadi, N. Boli, L. U. Irazusta, E. Maleki, K. Alexopoulos, A. Bernard, D. Mourtzis,”A knowledge-based collaborative platform for PSS design and production”, CIRP Journal of Manufacturing Science and Technology, Available Online, (2018)	pdf
2-277. G. Michalos, N. Kousi, P. Karagianis, C. Gkournelos, K. Dimoulas, S. Koukas, P. Mparis, A. Papavasiliou, S. Makris,”Seamleass human robot collaborative assembly – An automotive case study”, Mechatronics, Volume 55, Issue 3, pg. 194-211, (2018)	pdf
2-276. P. Aivaliotis, G. Michalos, S. Makris,”Cooperating robots for fixtureless assembly: modelling and simulation of tool exchange process”, International Journal of Computer Integrated Manufacturing, Volume 31, Issue 12, pg. 1235-1246, (2018)	pdf
2-275. N. Nikolakis, K. Alexopoulos, E. Xanthakis, G. Chryssolouris,”The digital twin implementation for linking the virtual representation of human-based production tasks to their physical counterpart in the factory-floor”, International Journal of Computer Integrated Manufacturing, Volume 32, No 1, pg. 1-12, (2019)	pdf
2-274. N. Nikolakis, V. Maratos, S. Makris,”A cyber physical system (CPS) approach for safe human-robot collaboration in a shared workplace”, Robotics and Computer-Integrated Manufacturing, Volume 56, pg. 233-243, (2019)	pdf
2-273. G. Michalos, K. Dimoulas, K. Mparis, P. Karagiannis, S. Makris,”A novel pneumatic gripper for in-hand manipulation and feeding of lightweight complex parts”, The International Journal of Advanced Manufacturing Technology, Volume 97, Issue 9–12, pp 3735–3750, (2018)	pdf
2-272. G. Michalos, N. Kousi, P. Karagianis, C. Gkournelos, K. Dimoulas, S. Koukas, P. Mparis, A. Papavasiliou, S. Makris,”Seamless human robot collaborative assembly – An automotive case study”, Mechatronics, Volume 55, pg 194-211, (2018)	pdf
2-271. N. Kousi, S. Koukas, G. Michalos, S. Makris,”Scheduling of smart intra – factory material supply operations using mobile robots”, International Journal of Production Research, Volume 57, Issue 3, pg. 801-814, (2018)	pdf
2-270. G. Michalos, A. Karvouniari, N. Dimitropoulos, T. Togias, S. Makris, “Workplace analysis and design using virtual reality techniques”, CIRP Annals of Manufacturing Technology, Volume 67, Issue 1, pg. 141-144, (2018)	pdf
2-269. K. Alexopoulos, K. Sipsas, E. Xanthakis, S. Makris, D. Mourtzis, “An industrial Internet of things based platform for context-aware information services in manufacturing”, International Journal of Computer Integrated Manufacturing, Vol 31, No. 11, pg. 1111-1123 , (2018)	pdf
2-268. J. Krüger, L. Wang, A. Verl, T. Bauernhansl, E. Carpanzano, S. Makris, J. Fleischer, G. Reinhart, J. Franke, S. Pellegrinelli,”Innovative Control of Assembly Systems and Lines”,CIRP Annals of Manufacturing Technology, Vol. 66, No. 2, pg. 707-730 , (2018)	pdf
2-267. A. Papacharalampopoulos, P. Aivaliotis, S. Makris,”Simulating robotic manipulation of cabling and interaction with surroundings”,International Journal of Advanced Manufacturing Technology, Vol. 96, No. 5-8, pg. 2183-2193 , (2018)	pdf
2-266. P. Tsarouchi, G. Michalos, S. Makris, T. Athanasatos, K. Dimoulas, G. Chryssolouris,”On a human–robot workplace design and task allocation system”,International Journal of Computer Integrated Manufacturing, Vol. 30, No. 12, pg. 1272-1279 , (2017)	pdf
2-265. E. Abele, G. Chryssolouris, W. Sihn, J. Metternich, H. ElMaraghy, G. Seliger, G. Sivard, W. ElMaraghy, V. Hummel, M. Tisch, S. Seifermann,”Learning factories for future oriented research and education in manufacturing”,CIRP Annals, Vol. 66, No. 2, pp. 803-826 , (2018)	pdf
2-264. K. Anyfantis, P. Stavropoulos, P. Foteinopoulos,”An approach for the design of multi-material mechanical components”,Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, (2018)	pdf
2-263. K. Anyfantis, P. Stavropoulos, G. Chryssolouris, “Fracture mechanics based assessment of manufacturing defects laying at the edge of CFRP-metal bondlines”,Production Engineering, Vol. 12, No. 2, pg. 173-183, (2018)	pdf
2-262. P. Stavropoulos, P. Foteinopoulos, “Modelling of Additive Manufacturing Processes: A Review and Classification”,Manufacturing Review, Vol. 5, No. 2, pg. 8-34, (2018)	pdf
2-261. P. Foteinopoulos, A. Papacharalampopoulos, P. Stavropoulos, “On thermal modeling of Additive Manufacturing processes”,CIRP Journal of Manufacturing Science and Technology, Vol. 20, pg. 66-83, (2018)	pdf
2-260. A.G. Diaz, V. Panadeiro, B. Lodeiro, J.R. Araujo, J. Stavridis, A. Papacharalampopoulos, P. Stavropoulos, “OpenLMD, an open source middleware and toolkit for laser-based additive manufacturing of large metal parts”,Robotics and Computer-Integrated Manufacturing (ROBOT CIM-INT MANUF), Vol. 53, pg. 153-161, (2018)	pdf
2-259. D. Petrides, A. Papacharalampopoulos, P. Stavropoulos,G. Chryssolouris, “Dematerialisation of products and manufacturing-generated knowledge content: relationship through paradigms”,International Journal of Production Research, Vol. 56, Issue 1-2, pg. 86-96, (2017)	pdf
2-258. H. Bikas,P. Stavropoulos,G. Chryssolouris, “Efficient machining of aero-engine components: challenges and outlook”,International Journal of Mechatronics and Manufacturing Systems(IJMMS), Vol. 9, No. 4, pg. 345-369, (2017)	pdf
2-257. D. Mourtzis, N. Milas, S. Fotia, A. Vlachou, “Development of Skills and Competences in Manufacturing towards Education 4.0: A Teaching Factory approach”, (AMP 2018), pp. 194-210, (2018)	pdf
2-256. D. Mourtzis, A.M. Papatheodorou, S. Fotia , “Development of a KPI assessment methodology and software tool for PSS evaluation and decision-making support”, ASME-Journal of Computing and Information Science in Engineering, 18(4) , (2018)	pdf
2-255. D. Mourtzis, E. Vlachou, V. Zogopoulos, “Mobile apps for providing Product-Service Systems and retrieving feedback throughout their lifecycle: A robotics use case”, International Journal of Product Lifecycle Management, Vol. 11, No. 2, pp. 116-130 , (2018)	pdf
2-254. D. Mourtzis, N. Milas, A. Vlachou, “An Internet of Things-Based Monitoring System for Shop-Floor Control”, ASME-Journal of Computing and Information Science in Engineering, (JCISE-17-1207) , (2018)	pdf
2-253. E. Maleki, F. Belkadi, N. Boli, B. J. van der Zwaag, K. Alexopoulos, S. Koukas, M. Marin-Perianu, A. Bernard, D. Mourtzis, “Ontology-based framework enabling smart Product-Service Systems: Application of sensing systems for machine health monitoring”, IEEE Internet of Things Journal, Vol. 5, Issue 6, pp. 4496-4505 , (2018)	pdf
2-252. D. Mourtzis, S. Fotia, N. Boli, P. Pittaro, “Product-service system (PSS) complexity metrics within mass customization and Industry 4.0 environment”, International Journal of Advanced Manufacturing Technology, Vol. 97, Issue 1-4, pp. 91-103 , (2018)	pdf
2-251. D. Mourtzis, S. Fotia, N. Boli, E. Vlachou, “An approach for the modelling and quantification of PSS customization”, International Journal of Production Research, pp. 1137-1153 , (2017)	pdf
2-250. D. Mourtzis, K. Vlachou, “A cloud-based cyber-physical system for adaptive shop-floor scheduling and condition-based maintenance”, Journal of Manufacturing Systems, Vol. 47, pp. 179-198 , (2018)	pdf
2-249. J. Spiliotopoulos, G. Michalos, S. Makris,”A Reconfigurable Gripper for Dexterous Manipulation in Flexible Assembly”, MDPI-Open Access Journal Inventions, Volume 3, Issue 1, (2018)	pdf
2-248. P. Tsarouchi, S. A. Matthaiakis, G. Michalos, S. Makris, G. Chryssolouris,”A method for detection of randomly placed objects for robotic handling”, International CIRP Journal of Manufacturing Science and Technology, Volume 14, pp. 20-27, (2016)	pdf
2-247. S. Makris, P. Tsarouchi, A. S. Matthaiakis, A. Athanasatos, X. Chatzigeorgiou, M. Stefos, K. Giavridis, S. Aivaliotis, “Dual arm robot in cooperation with humans for flexible assembly”, CIRP Annals – Manufacturing Technology, Volume 66, Issue 1, pp. 13-16, (2017)	pdf
2-246. J. Stavridis, A. Papacharalampopoulos, P. Stavropoulos, “Quality assessment in laser welding: a critical review”, The International Journal of Advanced Manufacturing Technology, pp. 1-23, (2017)	pdf
2-245. S. Makris, P. Karagiannis, S. Koukas, A. S. Matthaiakis, “Augmented reality system for operator support in human–robot collaborative assembly”, CIRP Annals – Manufacturing Technology, Volume 65, Issue 1, pp. 61-64 , (2016)	pdf
2-244. D. Mourtzis, S. Fotia, E. Vlachou, A. Koutoupes, “A Lean PSS design and evaluation framework supported by KPI monitoring and context sensitivity tools”, International Journal of Advanced Manufacturing Technolology, Vol. 94, Issue 5-8, pp.1623-1637 , (2017)	pdf
2-243. D. Mourtzis, E. Vlachou, N. Milas, N. Tapoglou, J. Mehnen, “A cloud-based knowledge enriched framework for machining efficiency based on machine tool monitoring”, Journal of Engineering Manufacturing, IMECHE Part B, Accepted for publication, Vol. 233, Issue 1, pp.278-292 ,(2017)	pdf
2-242. D. Mourtzis, S. Makris, G. Chryssolouris, “Computer Aided Manufacturing (CAM)”, CIRP Encyclopedia of Production Engineering, Luc Laperrière and Gunther Reinhart (Εds.), pp.254-266 , (2016)	A & B
2-241. G. Modoni, M. Doukas, W. Terkaj, M. Sacco, D. Mourtzis, “Enhancing factory data integration through the development of an ontology: from the reference models reuse to the semantic conversion of the legacy models”, International Journal of Computer Integrated Manufacturing, Vol. 30, Issue 10, pp.1043-1059 , (2016)	pdf
2-240. D. Mourtzis, M. Doukas, N. Milas, “A knowledge-based social networking app for collaborative problem-solving in manufacturing”, Manufacturing Letters, Vol 10, pp 1-5 , (2016)	pdf
2-239. P. Tsarouchi, A.S.Matthaiakis, S. Makris, G. Chryssolouris, “On a human-robot collaboration in an assembly cell”, International Journal of Computer Integrated Manufacturing, Volume 30, Issue 6, pp. 580-589 , (2017)	pdf
2-238. G. Pastras, A. Fysikopoulos, G. Chryssolouris, “A numerical approach to the energy efficiency of laser welding”, The International Journal of Advanced Manufacturing Technology, Volume 92, Issue 1-4, pp. 1243-1253 , (2017)	pdf
2-237. D. Mourtzis, E. Vlachou, V. Zogopoulos, “Cloud-based Augmented Reality Remote Maintenance through shop-floor Monitoring: A PPS approach”, ASME Journal of Manufacturing Science and Engineering, 139(6) , (2017)	pdf
2-236. D.Mourtzis, S. Fotia, K. Vlachou, “Lean Rules Extraction Methodology for Lean PSS Design via Key Performance Indicators Monitoring”, Journal of Manufacturing Systems, Volume 42, pp 233-243 , (2017)	pdf
2-235. D. Mourtzis, M. Doukas, C. Vandera “Smart mobile Apps for supporting product design and decision-making in the era of mass customization”, International Journal of Computer Integrated Manufacturing, Vol. 30, issue 7, pp.690-707 , (2016)	pdf
2-234. D. Mourtzis, E. Vlachou, “Cloud-based Cyber-physical Systems and Quality of Services”, TQM Emerald Journal, Volume 28, Issue 5, pp.704-733 , (2016)	pdf
2-233. D. Mourtzis, E. Vlachou, N. Xanthopoulos, M. Givehchi, L. Wang, “Cloud based- adaptive process planning considering availability and capabilities of machine tools”, Journal of Manufacturing Systems, Volume 39, pp.1-8 (2016)	pdf
2-232. G. Pintzos, C. Triantafyllou, N. Papakostas, D. Mourtzis, G. Chryssolouris, “Assembly Precedence Diagram Generation through Assembly Tiers Determination”, International Journal of Computer Integrated Manufacturing, Vol.29, Issue 10, pp.1045-1057 (2016)	pdf
2-231. N. Papakostas, G. Pintzos, C. Giannoulis, G. Chryssolouris, “An agent-based collaborative platform for the design of assembly lines”, International Journal of Computer Integrated Manufacturing, Volume 29, Issue 4, pp.374-385 (2016)	pdf
2-230. K. Alexopoulos, S. Makris, V. Xanthakis, K. Sipsas, G. Chryssolouris, “A concept for context-aware computing in manufacturing: the white goods case”, International Journal of Computer Integrated Manufacturing, 29(8), pp. 839-849 (2016)	pdf
2-229. D. Mourtzis, “Challenges and future perspectives for the life cycle of manufacturing networks in the mass customisation era”, Journal of Logistic Research 9:2, Available Online (2016)	pdf
2-228. D. Mourtzis, M. Doukas, E. Vlachou, “A mobile application for knowledge-enriched short-term scheduling of complex products”, Journal of Logistic Research 9:3, Available Online (2016)	pdf
2-227. P. Tsarouchi, S. Makris, G. Chryssolouris, “Human-Robot Interaction-Review and challenges on Task planning and Programming”, International Journal of Computer Integrated Manufacturing, Available Online (2016)	pdf
2-226. H. Bikas, P. Stavropoulos, G. Chryssolouris, “Additive manufacturing methods and modelling approaches: a critical review”, The International Journal of Advanced Manufacturing Technology, Volume 83, Issue 1, pp. 389-405 (2016)	pdf
2-225. D, Mourtzis, M. Doukas, “On the configuration of supply chains for assemble-to-order products: Case studies from the automotive and the CNC machine building sectors”, Robotics and Computer Integrated Manufacturing, Volume 36, pp. 13-24 (2015)	pdf
2-224. A. Papacharalampopoulos, S. Makris, A. Bitzios, G. Chryssolouris, “Prediction of cabling shape during robotic manipulation”, The International Journal of Advanced Manufacturing Technology, Volume 82, Issue 1, pp. 123-132 (2016)	pdf
2-223. P. Stavropoulos, A. Papacharalampopoulos, E. Vasiliadis, G. Chryssolouris, “Tool wear predictability estimation in milling based on multi-sensorial data”, The International Journal of Advanced Manufacturing Technology, Volume 82, Issue 1, pp. 509-521 (2016)	pdf
2-222. K. Efthymiou, A. Pagoropoulos, N. Papakostas, D. Mourtzis, G. Chryssolouris, “Manufacturing Systems Complexity Analysis Methods Review”, International Journal of Computer Integrated Manufacturing, Vol. 29, Issue 9, pp. 1025-1044 (2015)	pdf
2-221. G. Michalos, P. Sipsas, S. Makris, G. Chryssolouris, “Decision making logic for flexible assembly lines reconfiguration”, Robotics and Computer-Integrated Manufacturing, Available Online (2015)	pdf
2-220. N. Papakostas, G. Pintzos, C. Triantafyllou, “Computer-aided design assessment of products for end of life separation and material handling”, CIRP Annals – Manufacturing Technology, Volume 64, Issue 1, pp.185-188 (2015)	pdf
2-219. N. Tapoglou, J. Mehnen, E. Vlachou, M. Doukas, N. Milas, D. Mourtzis, “Cloud based platform for optimal machining parameter selection based on function blocks and real time monitoring”, ASME-Journal of Manufacturing Science and Engineering, Volume 137, Issue 4 (2015)	pdf
2-218. G. Michalos, A. Fysikopoulos, S. Makris, D. Mourtzis, G. Chryssolouris, “Multi criteria assembly line design and configuration–An automotive case study”, CIRP Journal of Manufacturing Science and Technology, Volume 9, pp.69-87 (2015)	pdf
2-217. K. Efthymiou, K. Sipsas, D. Mourtzis, G. Chryssolouris, “On knowledge reuse for manufacturing systems design and planning: A semantic technology approach”, CIRP Journal of Manufacturing Science and Technology, Volume 8, pp.1-11 (2015)	pdf
2-216. A. Fysikopoulos, G. Pastras, A. Vlachou, G. Chryssolouris, “An Approach to Increase Energy Efficiency Using Shutdown and Standby Machine Modes”, IFIP Advances in Information and Communication Technology, Volume 439, pp. 205-212 (2014)	pdf
2-215. G. Pastras, A. Fysikopoulos, C. Giannoulis, G. Chryssolouris, “A numerical approach to modeling keyhole laser welding”, International Journal of Advanced Manufacturing Technology, Available Online (2014)	pdf
2-214. K. Kaltsoukalas,S.Makris,G.Chryssolouris, “On generating the motion of industrial robot manipulators”, Robotics and Computer-Integrated Manufacturing, Volume 32, pp. 65–71 (2015)	pdf
2-213. G. Michalos, S. Makris, G. Chryssolouris, “The new assembly system paradigm”, International Journal of Computer Integrated Manufacturing, Available Online (2014)	pdf
2-212. S. Makris, G. Michalos, G. Chryssolouris, “Wireless information system for rotating operators in human-based assembly lines”, International Journal of Computer Integrated Manufacturing, Available Online (2014)	pdf
2-211. K. Efthymiou, A. Pagoropoulos, N. Papakostas, D. Mourtzis, G. Chryssolouris, “Manufacturing systems complexity: An assessment of manufacturing performance indicators unpredictability”, CIRP Journal of Manufacturing Science and Technology, Volume 7, Issue 4, pp. 324–334 (2014)	pdf
2-210. G. Pastras, A. Fysikopoulos, P. Stavropoulos, G. Chryssolouris, “An approach to modelling evaporation pulsed laser drilling and its energy efficiency”, International Journal of Advanced Manufacturing Technology, Springer, Available Online (2014)	pdf
2-209. M. Doukas, F. Psarommatis, D. Mourtzis, “Planning of manufacturing networks using an intelligent probabilistic approach for mass customised products”, International Journal of Advanced Manufacturing Technology, Vol. 74, pp.1747-1758	pdf
2-208. D. Mourtzis, M. Doukas, F. Psarommatis, “A toolbox for the design, planning and operation of manufacturing networks in a mass customisation environment”, Journal of Manufacturing Systems, Vol. 36, No. 302, pp. 274-286 (2015)	pdf
2-207. L. Rentzos, C. Vourtsis, D. Mavrikios, G. Chryssolouris, “Using VR for Complex Product Design”, Virtual, Augmented and Mixed Reality. Applications of Virtual and Augmented Reality, Lecture Notes in Computer Science, Volume 8526, pp.455-464 (2014)	pdf
2-206. N. Papakostas, K. Georgoulias, S. Koukas, G. Chryssolouris, “Organisation and operation of dynamic manufacturing networks”, International Journal of Computer Integrated Manufacturing, Available Online 2014	pdf
2-205. G. Chryssolouris, H.P. Wiendahl, L. Rentzos, S. Makris, “Factory”, CIRP Encyclopedia of Production Engineering, Springer, pp. 500-503, Available Online 2014	pdf
2-204. S. Makris, K. Alexopoulos, G. Chryssolouris, “Logistics”, CIRP Encyclopedia of Production Engineering, Springer, pp. 762-768, Available Online 2014	pdf
2-203. K. Alexopoulos, S. Makris, G. Chryssolouris, “Production”, CIRP Encyclopedia of Production Engineering, Springer, pp. 995-1003, Available Online 2014	pdf
2-202. K. Alexopoulos, K. Efthymiou, G. Chryssolouris, “System”, CIRP Encyclopedia of Production Engineering, Springer, pp. 1218-1221, Available Online 2014	pdf
2-201. K. Alexopoulos, G. Chryssolouris, “Process”, CIRP Encyclopedia of Production Engineering, Springer, pp. 973-975, Available Online 2014	pdf
2-200. S. Makris, G. Michalos, G. Chryssolouris, “Cost”, CIRP Encyclopedia of Production Engineering, Springer, pp. 289-294, Available Online 2014	pdf
2-199. K. Salonitis, J. Paralikas, A. Fysikopoulos, G. Chryssolouris, “Specific Energy”, CIRP Encyclopedia of Production Engineering, Springer, pp. 1124-1128, Available Online 2014	pdf
2-198. K. Salonitis, A. Fysikopoulos, G. Chryssolouris, “Abrasive Material”, CIRP Encyclopedia of Production Engineering, Springer, pp. 1-6, Available Online 2014	pdf
2-197. A. Fysikopoulos, G. Pastras, T. Alexopoulos, G. Chryssolouris, “On a generalized approach to manufacturing energy efficiency”, The International Journal of Advanced Manufacturing Technology, Springer, Available Online 2014	pdf
2-196. D. Mourtzis, M. Doukas, F. Psarommatis, “Design of manufacturing networks for mass customisation using an intelligent search method”, International Journal of Computer Integrated Manufacturing, Volume 28, Issue 7, pp.679-700 2014	pdf
2-195. G. Michalos, K. Kaltsoukalas, P. Aivaliotis, P. Sipsas, A. Sardelis, G. Chryssolouris, “Design and simulation of assembly systems with mobile robots”, CIRP Annals-Manufacturing Technology, Available Online 2014	pdf
2-194. S. Makris, P. Tsarouchi, D. Surdilovic, J. Kruger, “Intuitive dual arm robot programming for assembly operations”, CIRP Annals-Manufacturing Technology, Available Online 2014	pdf
2-193. J. Zendoia , U. Woy , N. Ridgway , T. Pajula , G. Unamuno , A. Olaizola , A. Fysikopoulos , R. Krain, “A specific method for the life cycle inventory of machine tools and its demonstration with two manufacturing case studies”, Journal of Cleaner Production, Available Online 2014	pdf
2-192. D. Mourtzis, M. Doukas, “The evolution of manufacturing systems: From craftsmanship to the era of customisation”, Design and Management of Lean Production Systems, V. Modrak, P. Semanco (Eds.), IGI Global, Chapter 1 (2014)	pdf
2-191. D. Mourtzis, M. Doukas, C. Vandera, “Mobile apps for product customisation and design of manufacturing networks”, Manufacturing Letters, Elsevier, Volume 2, No.2, pp. 30–34 (2014)	pdf
2-190. D. Mourtzis, M. Doukas, F. Psarommatis, C. Giannoulis, G. Michalos, “A web-based platform for mass customisation and personalisation”, CIRP Journal of Manufacturing Science and Technology, Volume 7, No.2, pp. 112–128 (2014)	pdf
2-189. K. Efthymiou, A. Pagoropoulos, D. Mourtzis, “Intelligent Scheduling for Manufacturing Systems: A Case Study”, Advances in Sustainable and Competitive Manufacturing Systems, Lecture Notes in Mechanical Engineering, Azevedo(ed.), Springer, pp.1153-1164 (2013)	pdf
2-188. G. Chryssolouris, P. Stavropoulos, K. Salonitis,”Process of Laser Machining”, (SpringerReference), Handbook of Manufacturing Engineering and Technology, Nee A. (Ed.), Springer-Verlag Berlin Heidelberg (2013)	pdf
2-187. Α. Φυσικόπουλος, Π. Σταυρόπουλος, Α. Παπαχαραλαμπόπουλος , Γ. Χρυσολούρης, P. Calefati,”Συστήματα Προγραμματισμού Ενεργειακά Αποδοτικών Διεργασιών”, Σύγχρονη Τεχνική Επιθεώρηση, Τεύχος Ιουνίου-Ιουλίου, σελ. 20-25 (2013)	pdf
2-186. D. Mourtzis, M. Doukas, F. Psarommatis, “Simulation-Based Design of Production Networks for Manufacturing of Personalised Products”, IFIP WG 5.7 International Conference, APMS 2012, Volume 397, pp.301-309 (2013)	pdf
2-185. D. Mourtzis, N. Papakostas, D. Mavrikios, S. Makris, K. Alexopoulos, “The role of simulation in digital manufacturing: applications and outlook”, International Journal of Computer Integrated Manufacturing (IJCIM), Vol. 28, No 1, pp. 3-24 (2015)	pdf
2-184. K. Salonitis, P. Stavropoulos, A. Fysikopoulos, G. Chryssolouris, “CO2 laser butt-welding of steel sandwich sheet composites”, International Journal of Advanced Manufacturing Technology, Available Online (2013)	pdf
2-183. J. Paralikas, K. Salonitis, G. Chryssolouris, “Robust optimization of the energy efficiency of the cold roll forming process”, International Journal of Advanced Manufacturing Technology, Available Online (2013)	pdf
2-182. N. Papakostas, K. Georgoulias, S. Koukas, “A novel platform for designing and evaluating Dynamic Manufacturing Networks”, CIRP Annals – Manufacturing Technology, Volume 63, No.1 (2013)	pdf
2-181. S. Makris, G. Pintzos, L. Rentzos, G. Chryssolouris, “Assembly support using AR technology based on automatic sequence generation”, CIRP Annals – Manufacturing Technology, Volume 62, No. 1, pp. 9–12 (2013)	pdf
2-180. G. Michalos, S. Makris, G. Chryssolouris, “The effect of job rotation during assembly on the quality of final product”, CIRP Journal of Manufacturing Science and Technology, Available Online (2013)	pdf
2-179. G. Chryssolouris, K. Efthymiou, N. Papakostas, D. Mourtzis, A. Pagoropoulos, “Flexibility and Complexity: is it a trade off?”, International Journal of Production Research, Vol. 51, No 23-24, pp. 5788-6802 (2013)	pdf
2-178. D. Mourtzis, M. Doukas, F. Psarommatis, “Design and Operation of Manufacturing Networks for Mass Customisation”, CIRP Annals – Manufacturing Technology, Volume 63, No.1, pp.467-470 (2013)	pdf
2-177. D. Mourtzis, K. Alexopoulos, G. Chryssolouris, “Flexibility consideration in the design of manufacturing systems: An industrial case study”, CIRP Journal of Manufacturing Science and Technology (CIRP JMST), CIRP CMS 44, Special Issue Volume 5, No.4, pp.276-283 (2013)	pdf
2-176. K. Alexopoulos, D. Mavrikios, G. Chryssolouris, “ErgoToolkit: an ergonomic analysis tool in a virtual manufacturing environment”, International Journal of Computer Integrated Manufacturing Vol.26, No.5, pp.440-452 (2013)	pdf
2-175. S. Makris, G. Michalos, G. Chryssolouris, “Virtual Commissioning of an Assembly Cell with Cooperating Robots”, Advances in Decision Sciences Volume 2012, Article ID 428060, 11 pages (2012)	pdf
2-174. D. Mourtzis, M. Doukas, F. Psarommatis, “Environmental impact of centralised and decentralised production networks in the era of personalisation”, K. Windt (ed.), Robust Manufacturing Control, Lecture Notes in Production Engineering, Chapter 27, ISBN 978-3-642-30748-5 (2013) Springer-Verlag Berlin Heidelberg	pdf
2-173. S. Makris, G. Chryssolouris, “Web Services based Supply Chain Control Logic-an Automotive Case Study”, International Journal of Production Research, pp. 1-15 (2012)	pdf
2-172. N. Papakostas, K. Efthymiou, K. Georgoulias, G. Chryssolouris, “On the configuration and planning of dynamic manufacturing networks”, Logistics Research, Springer, Volume 5, No. 3-4, pp. 105-111 (2012)	pdf
2-171. D. Mourtzis, M. Doukas, “Decentralized Manufacturing Systems Review: Challenges and Outlook”, K. Windt (ed.), Robust Manufacturing Control, Lecture Notes in Production Engineering, Vol. 5, No 3-4, pp. 113-121 Springer-Verlag Berlin Heidelberg	pdf
2-170. A.Y.C Nee, S.K. Ong, G. Chryssolouris, D. Mourtzis, “Augmented reality applications in design and manufacturing”, CIRP Annals-Manufacturing Technology, Volume 61, Issue 2, pp. 657–679 (2012)	pdf
2-169. J. Paralikas, K.Salonitis, G. Chryssolouris, “Energy efficiency of cold roll forming process”, The International Journal of Advanced Manufacturing Technology, online (2012)	pdf
2-168. S. Makris, L. Rentzos, G. Pintzos, D. Mavrikios, G. Chryssolouris, “Semantic-based taxonomy for immersive product design using VR techniques”, CIRP Annals – Manufacturing Technology, Volume 61, No.1, pp.147–150 (2012)	pdf
2-167. D. Mourtzis, M. Doukas, F. Psarommatis, “A multi-criteria evaluation of centralized and decentralized production networks in a highly customer-driven environment”, CIRP Annals – Manufacturing Technology, Volume 61, No.1, pp.427–430 (2012)	pdf
2-166. N. Papakostas, D. Mourtzis, S. Makris, G. Michalos, G. Chryssolouris, “An agent-based methodology for manufacturing decision making: a textile case study”, International Journal of Computer Integrated Manufacturing, Volume 25, No.6, pp.509-526 (2012)	pdf
2-165. S. Makris, G. Michalos, G. Chryssolouris, “RFID driven robotic assembly for random mix manufacturing”, Robotics and Computer-Integrated Manufacturing, Volume 28, No.3, pp.359-365 (2012)	pdf
2-164. G. Michalos, S. Makris, D. Mourtzis, “An intelligent search algorithm-based method to derive assembly line design alternatives”, International Journal of Computer Integrated Manufacturing, Volume 25, No.3, pp.211-229(2012)	pdf
2-163. N. Papakostas, K. Alexopoulos, A. Kopanakis, “Integrating Digital Manufacturing and Simulation Tools in the Assembly Design Process: A Cooperating Robots Cell Case”, CIRP Journal of Manufacturing Science and Technology, Volume 4, No.1, pp.96-100 (2011)	pdf
2-162. D. Mavrikios, N. Papakostas, D. Mourtzis, G. Chryssolouris, “On industrial learning & training for the Factories of the Future: A conceptual, cognitive & technology framework”, Journal of Intelligent Manufacturing, Special Issue on Engineering Education, Volume 24, No.3, pp. 473-485 (2013)	pdf
2-161. J. Pandremenos, G. Chryssolouris, “A neural network approach for the development of modular product architectures”, International Journal of Computer Integrated Manufacturing , Volume 24, No.10, pp.879-887 (2011)	pdf
2-160. D. Mavrikios, K. Alexopoulos, V. Xanthakis, M. Pappas, K. Smparounis, G. Chryssolouris, “A Web-based Platform for Collaborative Product Design, Review and Evaluation”, Digital Factory for Human-oriented Production Systems: The Integration of International Research Projects, L. Canetta, C. Redaelli, M. Flores (eds), 1st printing, Springer (2011)	pdf
2-159. J. Paralikas, A. Fysikopoulos, J. Pandremenos, G. Chryssolouris, “Product modularity and assembly systems: An automotive case study”, CIRP Annals- Manufacturing Technology, Volume 60, Issue 1, pp.165-168 (2011)	pdf
2-158. J. Paralikas, K.Salonitis, G. Chryssolouris, “Investigation of the effect of roll forming pass design on main redundant deformations on profiles from AHSS”, The International Journal of Advanced Manufacturing Technology, Volume 56, No. 5-8, pp 475-491 (2011)	pdf
2-157. D. Mourtzis, “Internet based collaboration in the manufacturing supply chain” CIRP Journal of Manufacturing Science and Technology , Volume 4, No 3, pp 296-304 (2011)	pdf
2-156. K. Alexopoulos, S. Makris, V. Xanthakis, G. Chryssolouris, “A web-services oriented workflow management system for integrated digital production engineering”, CIRP Journal of Manufacturing Science and Technology Volume 4, No. 3, pp 290-295(2011)	pdf
2-155. N. Papakostas, G. Michalos, S. Makris, D. Zouzias, G. Chryssolouris, “Industrial applications with cooperating robots for the flexible assembly”, International Journal of Computer Integrated Manufacturing, Volume 24, No. 7, pp.650-660 (2011)	pdf
2-154. G. Michalos, S. Makris, D. Mourtzis, “A web based tool for dynamic job rotation scheduling using multiple criteria”, CIRP Annals-Manufacturing Technology, Volume 60, No. 1, 2011, pp.453-456 (2011)	pdf
2-153. S. Makris, P. Zoupas, G. Chryssolouris, “Supply chain control logic for enabling adaptability under uncertainty”, International Journal of Production Research, Volume 49, Issue 1, pp.121-137 (2011)	pdf
2-152. K. Salonitis, D. Drougas, G. Chryssolouris, “Finite element modeling of penetration laser welding of sandwich materials”, Physics Procedia, Volume 5, Part 2, pp.327-335 (2010)	pdf
2-151. K. Alexopoulos, N. Papakostas, D. Mourtzis, G. Chryssolouris, “A method for comparing flexibility performance for the lifecycle of manufacturing systems under capacity planning constraints”, International Journal of Production Research, Volume 49, No. 11, pp. 3307-3317, (2010)	pdf
2-150. S. Makris, G. Chryssolouris, “Customer’s behavior modeling for manufacturing planning”, International Journal of Computer Integrated Manufacturing, Volume 23, Issue 7, pp.619-629, (2010)	pdf
2-149. G. Michalos, S. Makris, L. Rentzos, G. Chryssolouris, “Dynamic job rotation for workload balancing in human based assembly systems”, CIRP Journal of Manufacturing Science and Technology, Volume 2, No. 3, 2010, pp.153-160 (2010)	pdf
2-148. N. Papakostas, P. Papachatzakis, V. Xanthakis, D. Mourtzis, G. Chryssolouris, “An approach to operational aircraft maintenance planning”, International Journal of Decision Support Systems, Volume 48, No. 4, pp. 604-612, (2010)	pdf
2-147. N. Papakostas, G. Chryssolouris, “A Scheduling Policy for Improving Tardiness Performance”, Asian International Journal of Science and Technology, Volume 2, No. 3, pp. 79-89 (2009)	pdf
2-146. J. Pandremenos, C. Chatzikomis, G. Chryssolouris, “On the quantification of interface design architectures”, Asian International Journal of Science and Technology Production and Manufacturing Engineering, Volume 2, No. 3, pp. 41- 48 (2009)	pdf
2-145. I. Πανδρεμένος, K. Σαλωνίτης, Π. Σταυρόπουλος, Γ. Χρυσολούρης, “Αξιολόγηση άνεσης κράνους μοτοσυκλέτας”, Δελτίο Πανελληνίου Συλλόγου Διπλωματούχων Μηχανολόγων – Ηλεκτρολόγων, Τεύχος 424, Σελ. 26-32. (2009)	pdf
2-144. G. Michalos, S. Makris, N. Papakostas, D. Mourtzis, G. Chryssolouris,”Automotive assembly technologies review: challenges and outlook for a flexible and adaptive approach”, CIRP Journal of Manufacturing Science and Technology, Volume 2, Issue 2, pp. 81-91 (2010)	pdf
2-143. K. Salonitis, P. Stavropoulos, G. Chryssolouris, “Nanotechnology for the needs of the Automotive Industry”, International Journal of Nanomanufacturing, Volume 6, Nos 1/2/3/4, pp. 99-110 (2010)	pdf
2-142. P. Stavropoulos, A. Stournaras, K. Salonitis, G. Chryssolouris, “Experimental and Theoretical Investigation of the Ablation Mechanisms During Femptosecond Laser Machining”, International Journal of Nanomanufacturing, Volume 6, Nos 1/2/3/4, pp. 55-65 (2010)	pdf
2-141. Κ.Σαλωνίτης, Π. Σταυρόπουλος, Α. Στουρνάρας, Γ. Χρυσολούρης, “Διεργασίες Σκλήρυνσης μέσω Λείανσης: Μοντελοποίηση με χρήση πεπερασμένων στοιχείων”, Δελτίο Πανελληνίου Συλλόγου Διπλωματούχων Μηχανολόγων – Ηλεκτρολόγων, Τεύχος 423, Σελ. 30-39 (2009)	pdf
2-140. K. Salonitis, J. Pandremenos, J. Paralikas, G. Chryssolouris, “Multifunctional Materials: Engineering Applications and Processing Challenges”, International Journal of Advanced Manufacturing Technology, Volume 49, No 5-8, pp. 803-826 (2009)	pdf
2-139. Α. Στουρνάρας, Π. Σταυρόπουλος, Κ. Σαλωνίτης, Γ. Χρυσολούρης, “Μέθοδοι Παρακολούθησης των Διεργασιών με Δέσμη Laser”, Δελτίο Πανελληνίου Συλλόγου Διπλωματούχων Μηχανολόγων – Ηλεκτρολόγων, Τεύχος 422, Σελ. 40-50 (2009)	pdf
2-138. J. Paralikas, K. Salonitis, G. Chryssolouris, “Optimization of the roll forming process parameters – A semi empirical approach”, International Journal of Advanced Manufacturing Technology, Volumme 47, Numbers 9-12, pp. 1041-1052 Springer (2009)	pdf
2-137. N. Papakostas, K. Efthymiou, D. Mourtzis, G. Chryssolouris, “Modeling the complexity of manufacturing systems using non-linear dynamics approaches”, CIRP Annals – Manufacturing Technology, Volume 58, No.1, pp.437-440 (2009)	pdf
2-136. K. Georgoulias, N. Papakostas, G. Chryssolouris, S. Stanev, H. Krappe, J. Ovtcharova, “Evaluation of flexibility for the effective change management of manufacturing organizations”, International Journal of Robotics and Computer-Integrated Manufacturing, Volume 25, No.6, pp. 888-893 (2009)	pdf
2-135. A. Stournaras, G. Chryssolouris, ”On acoustic emissions in percussion laser drilling”, International Journal of Advanced Manufacturing Technology, Volume 46, No. 5-8, pp. 611-620 (2010)	pdf
2-134. A. Stournaras, K. Salonitis, G. Chryssolouris, ”Optical emissions for monitoring of percussion laser drilling process”, International Journal of Advanced Manufacturing Technology, Volume 46, No. 5-8, pp. 589-603 (2010)	pdf
2-133. P. Stavropoulos, A. Stournaras, G. Chryssolouris, ”On the design of a monitoring system for desktop micro-milling machines”, International Journal of Nanomanufacturing, Volume 3, No. 1/2, pp.29-39 (2009)	pdf
2-132. K. Georgoulias, N. Papakostas, D. Mourtzis, G. Chryssolouris, “Flexibility Evaluation: A Toolbox Approach”, International Journal of Computer Integrated Manufacturing Volume 22, No 5, pp.428-442 (2009)	pdf
2-131. J. Pandremenos, J. Paralikas, K. Salonitis, G. Chryssolouris, “Modularity Concepts for the Automotive Industry: A Critical Review”, CIRP Journal of Manufacturing Science and Technology, Volume 1, No.3, pp. 148-152 (2009)	pdf
2-130. G. Chryssolouris, D. Mavrikios, N. Papakostas, D. Mourtzis, G. Michalos, K. Georgoulias, “Digital manufacturing: history, perspectives, and outlook”, Proceedings of the Insitution of Mechanical Engineers Part B: Journal of Engineering Manufacture, Volume 222, No. 5, pp.451-462 (2008)	pdf
2-129. S. Stanev, H. Krappe, H. Abul Ola, K. Georgoulias, N. Papakostas, G. Chryssolouris, J. Ovtcharova, “Efficient Change Management for the Flexible Production of the Future”, Journal of Manufacturing Technology Management, Volume 19, No 6, 712-726 (2008)	pdf
2-128. G. Chryssolouris, N. Papakostas, D. Mavrikios, “A perspective on manufacturing strategy: Produce more with less”, CIRP Journal of Manufacturing Science and Technology, Volume 1, No.1, pp. 45-52. (2008)	pdf
2-127. G. Chryssolouris, D. Mavrikios, M. Pappas, V. Xanthakis, K. Smparounis, ”A Web and Virtual Reality-based Platform for Collaborative Product Review and Customisation”, Collaborative Design and Planning for Digital Manufacturing, Wang L. and Nee A.Y.C. (eds) 2nd printing, pp. 137-152, Springer (2009)	pdf
2-126. J. Paralikas, K. Salonitis, G. Chryssolouris, “Investigation of main roll-forming process parameters on quality for a V-section profile from AHSS”, International Journal of Advanced Manufacturing Technology, Volume 44, No. 3-4, pg. 223-237 (2009)	pdf
2-125. G. Chryssolouris, D. Mourtzis, N. Papakostas, Z. Papachatzakis, S. Xeromeritis, “Knowledge Management in Selected Manufacturing Case Studies”, Methods and Tools for Effective Knowledge Life-Cycle-Management, A.Bernard, S.Tichkiewitch (eds.), Part3, pp. 521-532, Springer (2008)	pdf
2-124. G. Chryssolouris, N. Papakostas, D. Mourtzis, S. Makris, “Knowledge Management in Manufacturing Process Modeling – Case Studies in Selected Manufacturing Processes”, Methods and Tools for Effective Knowledge Life-Cycle-Management, A.Bernard, S.Tichkiewitch (eds.), Part 3, pp. 507-520, Springer (2008)	pdf
2-123. G. Chryssolouris, D. Mourtzis, P. Stavropoulos, D. Mavrikios, J. Pandremenos, “Knowledge Management in a Virtual Lab Collaborative Training Project”, Methods and Tools for Effective Knowledge Life-Cycle-Management, A.Bernard, S.Tichkiewitch (eds.), Part 3, pp. 435-446, Springer (2008)	pdf
2-122. G. Chryssolouris, D. Mavrikios, S. Xeromeritis, K. Georgoulias, “The Use of Conceptual Maps for Competencies Mapping and Knowledge Formalization in a Virtual Lab”, Methods and Tools for Effective Knowledge Life-Cycle-Management, A.Bernard, S.Tichkiewitch (eds.), Part 1, pp. 213-225, Springer (2008)	pdf
2-121. G. Chryssolouris, S. Makris, D. Mourtzis, N. Papakostas, “Knowledge Management in a Virtual Enterprise – Web Based Systems for Electronic manufacturing”, Methods and Tools for Effective Knowledge Life-Cycle-Management, A.Bernard, S.Tichkiewitch (eds.), Part 1, pp. 107-126, Springer (2008)	pdf
2-120. G. Chryssolouris, D. Mavrikios, M.Pappas, ”A Web and Virtual Reality Based Paradigm for Collaborative Management and Verification of Design Knowledge”, Methods and Tools for Effective Knowledge Life-Cycle-Management , A. Bernard, S. Tichkiewitch (eds), Part 1, pp.91-105. Springer (2008)	pdf
2-119. D. Mourtzis, N.Papakostas, S. Makris, V. Xantakis, G. Chryssolouris, “Supply chain modeling and control for producing highly customized products”, CIRP Annals – Manufacturing Technology, Volume 57, No 1, pp. 451-454 (2008)	pdf
2-118. Δ. Μούρτζης, “Μέθοδος Προγραμματισμού και ελέγχου παραγωγής με εφαρμογή στην βιομηχανία τροφίμων”, Δελτίο Πανελληνίου Συλλόγου Διπλωματούχων Μηχανολόγων & Ηλεκτρολόγων, Σελ. 46-58 (2008)	pdf
2-117. H. Krappe, S. Stanev, J. Ovtcharova, K. Georgoulias, G. Chryssolouris, H. Abul Ola, “Development of Flexibility Methods and their Integration into Change Management Processes for Agile Manufacturing”, New Technologies for the Intelligent Design and Operation of Manufacturing Networks , M. Rabe, P. Mihok (Eds), pp. 37-52, Fraunhofer IRB Verlag (2007)	pdf
2-116. Σ. Μακρής, Ν. Παπακώστας, Δ. Μούρτζης, Γ. Χρυσολούρης, ”Περιβάλλον λογισμικού για τον προγραμματισμό και έλεγχο διαδικασιών ναυπηγοεπισκευής”, Χρονικά ναυπηγών μηχανικών, Τευχος 102, σελ. 30-38 (2007)	pdf
2-115. Β. Καραμπάτσου, Κ. Αλεξόπουλος, Δ. Φράγκος, Π. Σταυρόπουλος, Γ. Χρυσολούρης, ”Εφαρμογή της εικονικής πραγματικότητας στην επισκευή πλοίων: Περίπτωση μελέτης δεξαμενισμού πλοίων” , Χρονικά ναυπηγών μηχανικών, Τευχος 102, σελ. 20-29 (2007)	pdf
2-114. D. Mourtzis, ”An approach to planning and control of ship repair manufacturing operations”, Χρονικά ναυπηγών μηχανικών, Τευχος 102, σελ. 8-18 (2007)	pdf
2-113. D. Mavrikios, M. Pappas, M. Kotsonis, V. Karabatsou, G. Chryssolouris, “Digital Humans for Virtual Assembly Evaluation”, Digital Human Modeling, Duffy V.D. (ed), Volume 4561, pp. 939-948, Springer-Verlag (2007)	pdf
2-112. M. Sacco, C. Redaelli, C. Constantinescu, G. Lawson, M. D’Cruz, M. Pappas, “DiFac: Digital Factory for Human Oriented Production System”, Human-Computer Interaction: HCI Applications and Services, Jacko J.A. (ed), Volume 4553, pp. 1140-1149, Springer-Verlag (2007)	pdf
2-111. K. Georgoulias, N. Papakostas, S. Makris, G. Chryssolouris, “A Toolbox Approach for Flexibility Measurements in Diverse Environments”, Annals of CIRP, Volume 56, No.1, pp. 423-426 (2007)	pdf
2-110. K. Salonitis, A. Stournaras, P. Stavropoulos, G. Chryssolouris, ”Thermal modelling of the Material Removal Rate and Surface Roughness for EDM Die-Sinking”, International Journal of Advanced Manufacturing Technology, Volume 40, No . 3-4, pp. 316 – 323 (2009)	pdf
2-109. S. Drakopoulos, K. Salonitis, G. Tsoukantas, G. Chryssolouris, ”Environmental Impact of Ship Hull Repair”, International Journal of Product Development, Volume 1, No 3, pp.361-374 (2009)	pdf
2-108. N. Papakostas, D. Mourtzis, “An Approach for Adaptability Modeling in Manufacturing – Analysis Using Chaotic Dynamics”, Annals of CIRP- Manufacturing Technology, Volume 56, No.1, pp.491-494 (2007)	pdf
2-107. D. Mavrikios, M. Pappas, V. Karabatsou, G. Chryssolouris, “A new concept for collaborative product & process design within a human-oriented Collaborative Manufacturing Environment”, The Future of Product Development: Proceedings of the 17th CIRP Design Conference , F. Krause (ed), Part 5, pp. 301-310, Springer-Verlag (2007)	pdf
2-106. M. Pappas, V. Karabatsou, D. Mavrikios, G. Chryssolouris, “Ergonomic evaluation of virtual assembly tasks”, Digital Enterprise Technology: Perspectives and Future Challenges, P. Cunha, P. Maropoulos (eds), Session 5, pp. 511-518, Springer-Verlag (2007)	pdf
2-105. Δ. Μούρτζης, Γ. Χρυσολούρης, “Προγραμματισμός και έλεγχος ναυπηγο-επισκευαστικών διαδικασιών”, Δελτίο Πανελληνίου Συλλόγου Διπλωματούχων Μηχανολόγων & Ηλεκτρολόγων, σελ. 22-30 (2007)	pdf
2-104. Σ. Μακρής, Ν. Παπακώστας, Δ. Μούρτζης, Γ. Χρυσολούρης, “Προγραμματισμός και έλεγχος ναυπηγοεπισκευής σε περιβάλλον λογισμικού”, Δελτίο Πανελληνίου Συλλόγου Διπλωματούχων Μηχανολόγων & Ηλεκτρολόγων, σελ. 32-38 (2007)	pdf
2-103. Β. Καραμπάτσου, Κ. Αλεξόπουλος, Δ. Φράγκος, Π. Σταυρόπουλος, Γ. Χρυσολούρης, “Σχεδιασμός Ναυπηγοεπισκευαστικών εργασιών: Η εικονική πραγματικότητα στον δεξαμενισμό των πλοίων”, Δελτίο Πανελληνίου Συλλόγου Διπλωματούχων Μηχανολόγων & Ηλεκτρολόγων, σελ. 14-21 (2007)	pdf
2-102. K. Alexopoulos, N. Papakostas, D. Mourtzis, P. Gogos, G. Chryssolouris, “Oscillator analogy for modelling the manufacturing systems dynamics”, International Journal of Production Research, Volume 46, No 10, pp. 2547-2563 (2008)	pdf
2-101. G. Tsoukantas, A. Stournaras, G. Chryssolouris, “Experimental investigation of remote welding with CO2 and Nd: YAG laser-based systems”, Journal of Laser Applications, Volume 20, No. 1, pp. 50-58 (2008)	pdf
2-100. A. Stournaras, K. Salonitis, P. Stavropoulos, G. Chryssolouris, “Theoretical and experimental investigation of pulsed laser grooving process”, International Journal of Advanced Manufacturing Technology, Volume 44, No. 1-2, pp. 114-124 (2009)	pdf
2-99. A. Stournaras, P. Stavropoulos, K. Salonitis, G. Chryssolouris, “An investigation of quality in CO2 laser cutting of aluminum”, CIRP Journal of Manufacturing Science and Technology, Volume 2, No. 1, pp. 61-69 (2009)	pdf
2-98. P. Stavropoulos, G. Chryssolouris, “Molecular Dynamics Simulations of Laser Ablation: The Morse Potential Function Approach”, International Journal of Nanomanufacturing, Volume 1, No. 6, pp. 736-750 (2007)	pdf
2-97. Κ.Σαλωνίτης, Γ. Τσουκαντάς, Π. Σταυρόπουλος, Α. Στουρνάρας, Σ. Δρακόπουλος, Γ. Χρυσολούρης, “Τεχνικές Ταχείας Πρωτοτυποποίησης: Διεθνής Κατάσταση και νέες Προοπτικές”, Δελτίο Πανελληνίου Συλλόγου Διπλωματούχων Μηχανολόγων & Ηλεκτρολόγων, Τεύχος 389, σελ. 38-43 (2006)	pdf
2-96. D. Mourtzis, “An Approach to Planning of Food Industry Manufacturing Operations: A Case Study”, CIRP Journal of Manufacturing Systems, Volume 35, No.6, pp. 551- 561 (2006)	pdf
2-95. G. Tsoukantas, G. Chryssolouris, “Theoretical and experimental analysis of the remote welding process on thin, lap-joined AISI 304 sheets”, International Journal of Advanced Manufacturing Technology, Volume 35, No. 9-10, pp. 880-894 (2006)	pdf
2-94. K. Salonitis, A. Stournaras, G. Tsoukantas, P. Stavropoulos, G. Chryssolouris, “A Theoretical and Experimental Investigation on Limitations of Pulsed Laser Drilling”, Journal of Materials Processing Technology, Volume 183, Νο. 1, pp. 96-103 (2007)	pdf
2-93. N. Giannelos, N. Papakostas, D. Mourtzis, G. Chryssolouris, “Dispatching policy for manufacturing jobs and time-delay plots”, International Journal of Computer Integrated Manufacturing, Volume 20, No.4, pp. 329-337 (2007)	pdf
2-92. S. Makris, V. Xanthakis, D. Mourtzis, G. Chryssolouris, “On the information modeling for the electronic operation of supply chains: A maritime case study”, Robotics and Computer-Integrated Manufacturing, Volume 24, No.1, pp.140-149 (2008)	pdf
2-91. K. Salonitis, T. Chrondros, G. Chryssolouris, “Grinding wheel effect in the grind-hardening process”, International Journal of Advanced Manufacturing Technology, Volume 38, No. 1-2, pp. 48-58 (2008)	pdf
2-90. K. Alexopoulos, N. Papakostas, D. Mourtzis, P. Gogos, G. Chryssolouris, “Quantifying the flexibility of a manufacturing system by applying the transfer function”, International Journal of Computer Integrated Manufacturing, Volume 20, No. 6, pp. 538-547 (2007)	pdf
2-89. D. Mavrikios, V. Karabatsou, K.Alexopoulos, M. Pappas, P. Gogos, G.Chryssolouris, “An approach to human motion analysis and modelling”, International Journal of Industrial Ergonomics, Volume 36, No. 11, pp. 979-989 (2006)	pdf
2-88. C. Lalas, D. Mourtzis, N. Papakostas, G. Chryssolouris, “A Simulation-Based Hybrid Backwards Scheduling Framework for Manufacturing Systems”, International Journal of Computer Integrated Manufacturing, Volume 19, No. 8, pp. 762-774 (2006)	pdf
2-87. G. Chryssolouris, M. Pappas, V. Karabatsou, D. Mavrikios, K. Alexopoulos, “A Shared VE for Collaborative Product Development in Manufacturing Enterprises”, Collaborative Product Design and Manufacturing Methodologies and Applications, W. Li, S. Ong, A. Nee, C. McMahon (eds), pp. 59-70, Springer-Verlag (2007)	pdf
2-86. K. Alexopoulos, D.Mourtzis, N. Papakostas, G. Chryssolouris, “DESYMA – Assessing flexibility for the lifecycle of manufacturing systems”, International Journal of Production Research, Volume 45, No. 7, pp. 1683-1694 (2007)	pdf
2-85. D. Mavrikios, V. Karabatsou, M. Pappas, G. Chryssolouris, “An efficient approach to human motion modeling for the verification of human-centric product design and manufacturing in virtual environments”, Robotics and Computer Integrated Manufacturing, Volume 23, No. 5, pp. 533-543 (2007)	pdf
2-84. M. Pappas, V. Karabatsou, D. Mavrikios, G. Chryssolouris, “Development of a web-based collaboration platform for manufacturing product and process design evaluation using virtual reality techniques”, International Journal of Computer Integrated Manufacturing, Volume 19, No. 8, pp. 805-814 (2006)	pdf
2-83. D. Mavrikios, V. Karabatsou, D. Fragos, G. Chryssolouris, “A Prototype Virtual Reality Based Demonstrator for Immersive and Interactive Simulation of Welding Processes”, International Journal of Computer Integrated Manufacturing, Volume19, No.3, pp. 294-300 (2006)	pdf
2-82. K. Alexopoulos, D. Mavrikios, M.Pappas, E. Ntelis, G. Chryssolouris, “Multi-Criteria Upper Body Human Motion Adaptation”, International Journal of Computer Integrated Manufacturing, Volume 20, No.1, pp. 57-70 (2007)	pdf
2-81. K. Salonitis, G. Chryssolouris, “Thermal analysis of Grind-Hardening Process”, International Journal of Manufacturing Technology and Management, Volume 12, Nos. 1/2/3, pp. 72-92 (2007)	pdf
2-80. K. Salonitis, G. Chryssolouris, “Cooling in Grind-Hardening operations”, International Journal of Advanced Manufacturing Technology, Volume 33, No. 3-4, pp. 285-297 (2007)	pdf
2-79. G. Tsoukantas, K. Salonitis, A. Stournaras, P. Stavropoulos, G. Chryssolouris, “On Optimal Design Limitations of Generalized Two-Mirror Remote Beam Delivery Laser Systems: The case of remote Welding”, International Journal of Advanced Manufacturing Technology, Volume 32, Νο. 9-10, pp. 932-941 (2007)	pdf
2-78. C. Lalas, K. Tsirbas, Κ. Salonitis, G. Chryssolouris, “An analytical model of the laser clad geometry”, International Journal of Advanced Manufacturing Technology, Volume 32, No. 1-2, pp. 34-41 (2007)	pdf
2-77. K. Salonitis, S. Drakopoulos, D. Karigiannis, “Una nueva oportunidad para el rotomoldeo”, Plast’21: La revista de los plasticos y su cultura, No. 149, pp. 138-141 (2005)	pdf
2-76. D. Mourtzis, “An integrated system for managing ship repair operations”, International Journal of Computer Integrated Manufacturing, Volume 18, No 8, pp. 721-733 (2005)	pdf
2-75. G. Chryssolouris, K. Tsirbas, K. Salonitis, “An analytical and Experimental Approach to Grind-Hardening”, SME Journal of Manufacturing Processes, Volume 7, No. 1, pp. 1-9 (2005)	pdf
2-74. G. Chryssolouris, N. Papakostas, D. Mourtzis, “Refinery Short-term scheduling with tank farm, inventory and distillation management: an integrated simulation-based approach”, European Journal of Operations Research, Volume 166,No. 3, pp. 812-827 (2005)	pdf
2-73. G. Chryssolouris, P. Stavropoulos, G. Tsoukantas, K. Salonitis, A. Stournaras, “Nanomanufacturing Processes: A Critical Review”, International Journal of Materials & Product Technology, Volume 21, No 4, pp. 331-348 (2004)	pdf
2-72. G. Chryssolouris, D. Mavrikios, D. Fragos, V. Karabatsou, “Verification of human factors in manufacturing process design. A virtual experimentation approach”, In Methods and Tools for Co-operative and Integrated Design, S. Tichkiewitch, D. Brissaud (eds), Edition 1, pp. 463-474 (2004)	pdf
2-71. G. Chryssolouris, D. Mavrikios, D. Fragos, V. Karabatsou, K. Alexopoulos, “A hybrid approach to the verification and analysis of assembly and maintenance processes using Virtual Reality and Digital Mannequin technologies”, Virtual Reality and Augmented Reality Applications in Manufacturing, A. Nee, S. Ong (eds), pp.97-110, Springer-Verlag (2004)	pdf
2-70. G. Chryssolouris, N. Giannelos, N. Papakostas, D. Mourtzis, “Chaos Theory in Production Scheduling”, CIRP Annals, Volume 53, No.1, pp. 381-383 (2004)	pdf
2-69. G. Chryssolouris, S. Makris, V. Xanthakis, D. Mourtzis , “Towards the internet based supply chain management for the ship repair industry”, International Journal of Computer Integrated Manufacturing, Volume 17, No.1, pp. 45-57 (2004)	pdf
2-68. G. Chryssolouris, V. Karabatsou,G. Kapetanaki, “Virtual Reality and Human Simulation for Manufacturing”, CIRP Journal of Manufacturing Systems, Volume 32, No.6 (2003)	pdf
2-67. G. Chryssolouris, S. Makris, V. Xanthakis, V. Konstantinis, “An XML based implementation of the Value Added Chain in Manufacturing: A Ship repair Case Study”, CIRP Journal of Manufacturing Systems, Volume 32, No.6 (2003)	pdf
2-66. G. Chryssolouris, J. Kechagias, P. Moustakas, E. Koutras, “An Experimental Investigation of the Tensile Strength of Parts Produced by Laminated Object Manufacturing (LOM) Process”, CIRP Journal of Manufacturing Systems, Volume 32, No.5 (2003)	pdf
2-65. G. Chryssolouris, K. Tsirbas, S. Zannis, “An Experimental Investigation of Grind-Hardening”, CIRP Journal of Manufacturing Systems, Volume 32, No.2 (2003)	pdf
2-64. G. Chryssolouris, D. Mourtzis, M. Geronimaki, “An approach to planning of industry: A case study for a refrigerators producing facility”, CIRP Journal of Manufacturing Systems, Volume 32, No.6, pp.499-506 (2003)	pdf
2-63. G. Chryssolouris, S. Zannis, K. Tsirbas, C. Lalas, “On laser cladding”, CIRP Journal of Manufacturing Systems, Volume 32, No.6, (2003)	pdf
2-62. G. Chryssolouris, D. Mourtzis, S. Makris, “An Approach to Planning and Control of Ship Repair Manufacturing Operations”, CIRP Journal of Manufacturing Systems, Volume 32, No.1, pp. 13-19 (2003)	pdf
2-61. S. Xeromerites, Z. Papachatzakis, G. Chryssolouris, “SMART SME – Use of Smart Collaboration Forms by Inter-networked Manufacturing SMEs”, Building the Knowledge Economy: Issues, Applications, Case Studies, P.Cunningham, M. Cunningham, P. Fatelnig (Eds) (2003)	pdf
2-60. G. Chryssolouris, S. Zannis, K. Tsirbas, C. Lalas, “An Experimental Investigation of Laser Cladding”, CIRP Annals, Volume 51, No.1, pp. 145-148 (2002)	pdf
2-59. G. Chryssolouris, D. Mavrikios, D. Fragos, V. Karabatsou, K. Pistiolis, “A Novel Virtual Experimentation Approach to Planning and Training for Manufacturing Processes-The Virtual Machine Shop”, International Journal of Computer Integrated Manufacturing, Volume 15, No.3, pp. 214-221 (2002)	pdf
2-58. G. Chryssolouris, S. Fassois, E. Vasileiou, “Data sampling technique (DST) for measuring surface waving”, International Journal of Production Research, Volume 40, No.1, pp. 165-177 (2002)	pdf
2-57. G. Chryssolouris, V. Subramaniam, “Dynamic scheduling of manufacturing job shops using genetic algorithms”, Journal of Intelligent Manufacturing, Volume 12, No. 3, pp. 281-293 (2001)	pdf
2-56. G. Chryssolouris, D. Mavrikios, D. Fragos, V. Karabatsou, “A virtual reality-based experimentation environment for the verification of human-related factors in assembly processes”, Robotics and Computer-Integrated Manufacturing, Volume 16, No.4, pp. 267-276 (2000)	pdf
2-55. G. Chryssolouris, N. Papakostas, D. Mourtzis, “A Decision Making Approach for Nesting Scheduling: A Textile Case”, International Journal of Production Research, Volume 38, No.17, pp. 4555-4564 (2000)	pdf
2-54. W. Eversheim, G. Chryssolouris, D. Mourtzis, N. Michalas, “Approaches for scheduling in ship repair industry”, CIRP Journal of Manufacturing Systems, Volume 30, No.6 (2000)	pdf
2-53. G. Chryssolouris, J.Kotselis, P.Koutzampoikidis, S. Zannis, D. Mourtzis, “Dimensional accuracy modelling of stereolithografy parts”, CIRP Journal of Manufacturing Systems, Volume 30, No.2, pp. 170-174 (2000)	pdf
2-52. G. Chryssolouris, D. Mavrikios, D. Mourtzis, K. Pistiolis, D. Fragos, “An Integrated Virtual Manufacturing Environment for Interactive Process Design and Training – The Virtual Machine Shop”, CIRP Journal of Manufacturing Systems, Volume 30, No.4, pp. 409-415 (2000)	pdf
2-51. G. Chryssolouris, V. Subramaniam, “Dynamic scheduling of manufacturing job shops using extreme value theory”, Journal of Production Planning & Control, Volume 11, No.2, pp. 122-132 (2000)	pdf
2-50. G. Chryssolouris, N. Papakostas, S. Makris, D. Mourtzis, “Planning and Scheduling of Shipyard Processes”, Application of Information Technologies to the Maritime Industries, C. Guedes Soares, J. Brodda, (eds.), pp. 255-274 (1999)	pdf
2-49. G. Chryssolouris, S. Karagiannis, “YAG Laser Welding”, LIA Handbook of Laser Materials Processing, J. Ready, D. Farson, T. Feeley (eds.), Chapter 10.3.1, pp. 325-333, Springer-Verlag (1998)	pdf
2-48. G. Chryssolouris, N. Anifantis, S. Karagiannis, “An approach to the Dynamic Modelling of Manufacturing Systems”, International Journal of Production Research, Volume 36, No.2, pp. 475-483 (1998)	pdf
2-47. G. Chryssolouris, N. Anifantis, S. Karagiannis, “Laser Assisted Machining: an Overview”, 75th Anniversary Issue of the Journal of Manufacturing Science and Engineering, ASME, Volume 119, No. 4B, pp. 766-769 (1997)	pdf
2-46. G. Chryssolouris, “Flexibility and Its Measurement”, CIRP Annals-Manufactruring Technology, Volume 45, No.2, pp. 581-587 (1996)	pdf
2-45. G. Chryssolouris, M. Lee, A. Ramsey, “Confidence Internal Prediction for Neural Network Models”, IEEE Transactions on Neural Networks, Volume 7, No.1, pp. 229-232 (1996)	pdf
2-44. W. Chun Choi, G. Chryssolouris, “Analysis of the laser grooving and cutting processes”, Journal of Physics. D: Applied Physics, Volume 28, No.5, pp. 873-878 (1995)	pdf
2-43. P. Sheng, G. Chryssolouris, “Theoretical Model of Laser Grooving for Composite Materials”, Journal of Composite Materials, Volume 29, No.1, pp. 96-112 (1995)	pdf
2-42. D. Mourtzis, N. Papakostas, G. Chryssolouris, “An Approach to Planning of Textile Manufacturing Operations: A Scheduling Method”, Life Cycle Modelling for Innovative Products and Processes , H. Jamsen and F. Krause (eds), pp. 131-145. (1995)	pdf
2-41. P. Sheng, G. Chryssolouris, “Investigation of acoustic sensing for laser machining processes. Part 2: Laser grooving and cutting”, Journal of Materials Processing Technology, Volume 43, No. 2-4, pp. 145-163 (1994)	pdf
2-40. P. Sheng, G. Chryssolouris, “Investigation of acoustic sensing for laser machining processes. Part 1: Laser drilling”, Journal of Materials Processing Technology, Volume 43, No. 2-4, pp. 125-144 (1994)	pdf
2-39. G. Chryssolouris, D. Hardt, “Manufacturing Engineering”, Encyclopedia of Applied Physics, Volume 9, pp. 279-304 (1994)	pdf
2-38. G. Chryssolouris, V. Subramaniam, M. Lee, “Use of Extreme Value Theory in Engineering Decision Making”, Journal of Manufacturing Systems, Volume 13, No.4, pp. 302-312 (1994)	pdf
2-37. G. Chryssolouris, M. Lee, “An Approach to Real-Time Flexible Scheduling”, International Journal of Flexible Manufacturing Systems, Volume 6, No. 3, pp. 235-253 (1994)	pdf
2-36. G. Chryssolouris, “Sensors in Laser Machining”, CIRP Annals-Manufacturing Technology, Volume 43, No.2, pp. 513-519 (1994)	pdf
2-35. G. Antonopoulos, D. Mourtzis, N. Zagouras, “Recent technological progress in cotton spinning mills and its impact on work”, Participation, Organizational Effectiveness and Quality of Work life in the year 2000, N. Smokoviti, G. Szell (eds), pp. 377-386 (1994)	pdf
2-34. P. Sheng, G. Chryssolouris, “Comparison of Surface Quality Improvement Techniques for Laser Grooving of Composite Materials”, Journal of Manufacturing Science and Engineering, ASME, Volume 64, pp. 795-801 (1993)	pdf
2-33. G. Chryssolouris, A. Yablon, “Depth Prediction in Laser Machining with the Aid of Surface Temperature Measurements”, CIRP Annals, Volume 42, No.1, pp. 205-207 (1993)	pdf
2-32. G. Chryssolouris, P. Sheng, N. Anastasia, “Laser Grooving of Composite Materials with the Aid of a Water Jet”, Journal of Engineering for Industry, ASME, Volume 115, No.1, pp. 62-72 (1993)	pdf
2-31. G. Chryssolouris, K. Dicke, M. Lee, “On the Resources Allocation Problem”, International Journal of Production Research, Volume 30, No.12, pp. 2773-2795 (1992)	pdf
2-30. G. Chryssolouris, M. Lee, “An Assessment of Flexibility in Manufacturing Systems”, Manufacturing Review, Volume 5, No.2, pp.105-116 (1992)	pdf
2-29. P. Drakatos, R. Lyon, G. Chryssolouris, G. Kallistratos, “Reliability and Exploitation of Waste-Water Treatment Plants Using Diagnostic Methods”, International Journal of Environmental Studies, Volume 40, No. 4, pp. 267-280 (1992)	pdf
2-28. G. Chryssolouris, M. Domroese, P. Beaulieu, “Sensor Synthesis for Control of Manufacturing Processes”, Journal of Engineering for Industry, ASME, Volume 114, No. 2, pp. 158-174 (1992)	pdf
2-27. G. Chryssolouris, J. Pierce, K. Dicke, “A Decision-Making Approach to the Operation of Flexible Manufacturing Systems”, International Journal of Flexible Manufacturing Systems, Volume 4, No. 3-4, pp. 309-330 (1992)	pdf
2-26. G. Chryssolouris, M. Lee, M. Domroese, “The Use of Neural Networks in Determining Operational Policies for Manufacturing Systems”, Journal of Manufacturing Systems, Volume 10, No.2, pp. 166-175 (1991)	pdf
2-25. G. Chryssolouris, P. Sheng, F. von Alvensleben, “Process Control of Laser Grooving Using Acoustic Sensing”, Journal of Engineering for Industry, ASME, Volume 113, No. 3, pp. 268-275 (1991)	pdf
2-24. G. Chryssolouris, M. Lee, K. Dicke, “An Approach to Short Interval Scheduling for Discrete Parts Manufacturing”, International Journal of Computer Integrated Manufacturing, Volume 4, No.3, pp. 157-168 (1991)	pdf
2-23. G. Chryssolouris, J. Pierce, K. Dicke, “An Approach for Allocating Manufacturing Resources to Production Tasks”, Journal of Manufacturing Systems, Volume 10, No.5, pp. 368-382 (1991)	pdf
2-22. G. Chryssolouris, M. Lee, J. Pierce, M. Domroese, “Use of Neural Networks for the Design of Manufacturing Systems”, Manufacturing Review, Volume 3, No.3, pp. 187-194 (1990)	pdf
2-21. G. Chryssolouris, P. Sheng, “Laser Machining Composites: Just Add Water”, SME Quarterly on Machining Technology, pp. 1-5. (1990)	pdf
2-20. G. Chryssolouris, P. Sheng, W.C. Choi, “Three Dimensional Laser Machining of Composite Materials”, Journal of Engineering Materials and Technology, ASME, Volume 112, No. 4, pp. 387-392 (1990)	pdf
2-19. G. Chryssolouris, P. Sheng, N. Anastasia, “Development of Techniques for Three-Dimensional Laser Machining”, SAE Transactions, Journal of Materials and Manufacturing, Volume 100, Section 5, pp. 916-924 (1991)	pdf
2-18. G. Chryssolouris, M. Domroese, L. Zsoldos, “A Decision-Making Strategy for Machining Control”, CIRP Annals, Volume 39, No.1, pp. 501-504 (1990)	pdf
2-17. G. Chryssolouris, M. Guillot, “A Comparison of Statistical and AI Approaches to the Selection of Process Parameters in Intelligent Machining”, Journal of Engineering for Industry, ASME, Volume 112, pp. 122-131 (1990)	pdf
2-16. G. Chryssolouris, M. Domroese, “An Experimental Study of Strategies for Integrating Sensor Information in Machining”, CIRP Annals, Volume 38, No.1, pp. 425-428 (1989)	pdf
2-15. G. Chryssolouris, I. Gruenig, “On a Database Design for Intelligent Manufacturing Systems”, International Journal of Computer Integrated Manufacturing, Volume 1, No.3, pp. 171-184 (1989)	pdf
2-14. G. Chryssolouris, M. Guillot, M. Domroese, “A Decision Making Approach to Machining Control”, Journal of Engineering for Industry, ASME, Volume 110, pp. 397-398 (1988)	pdf
2-13. G. Chryssolouris, J. Bredt, “Machining of Ceramics Using a Laser Lathe”, International Ceramic Review, Volume 37, No. 2, pp. 43-45 (1988)	pdf
2-12. G. Chryssolouris, K. Wright, J. Pierce, W. Cobb, “Manufacturing Systems Operation: Dispatch Rules Versus Intelligent Control”, Robotics and Computer-Integrated Manufacturing, Volume 4, No.3/4, pp. 531-544 (1988)	pdf
2-11. G. Chryssolouris, P. Sheng, W. C. Choi, “Investigation of Laser Grooving for Composite Materials”, CIRP Annals, Volume 37, No.1, pp. 61-164 (1988)	pdf
2-10. G. Chryssolouris, J. Bredt, S. Kordas, E. Wilson, “Theoretical Aspects of a Laser Machine Tool”, Journal of Engineering for Industry, ASME, Volume 110, No.1, pp. 65-70 (1988)	pdf
2-9. G. Chryssolouris, “MADEMA: An Approach to Intelligent Manufacturing Systems”, CIM Review, Volume 3, No.3, pp.11-17 (1987)	pdf
2-8. G. Chryssolouris, S. Patel, “In Process Control for Quality Assurance”, Industrial High Technology for Manufacturing, K. McKee, D. Tijunelis (eds.), Chapter 22, New York: Marcel Dekker, Inc, pp. 609-643 (1987)	pdf
2-7. G. Chryssolouris, K. Wright, “Knowledge-Based Systems in Manufacturing”, CIRP Annals, Volume 35, No. 2, pp. 437-440 (1986)	pdf
2-6. G. Chryssolouris, S. Chan, “An Integrated Approach to Process Planning and Scheduling”, CIRP Annals, Volume 34, No.1, pp. 413-417(1985)	pdf
2-5. G. Chryssolouris, P. Hoffman, “In Process Quality Control for Cold Forming”, SME Transactions, NAMRC-XI I, pp. 32-37 (1984)	pdf
2-4. G. Chryssolouris, M. Wollowitz, “Electrochemical Hole Making”, CIRP Annals, Volume 33, No.1, pp. 99-104 (1984)	pdf
2-3. G. Chryssolouris, S. Chan, W. Cobb, “Decision Making on the Factory Floor: An Integrated Approach to Process Planning and Scheduling”, Robotics and Computer-Integrated Manufacturing, Volume 1, No.3-4, pp. 315-319 (1984)	pdf
2-2. G. Chryssolouris, “Effects of Machine-Tool-Workpiece Stiffness on the Wear Behavior of Superhard Cutting Materials”, CIRP Annals, Volume 31, Issue 1, pp. 65-69 (1982)	pdf
2-1. G. Chryssolouris, “Turning of Hardened Steels Using CBN Tools”, Journal of Applied Metalworking, Volume 2, Number 2, pp. 100-106 (1982)	pdf